Description
Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum then send them out to be bead blasted Type II anodized blue and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1"25" uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25" uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7/8" chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing/deflection under hard use and braking with zero binding when in use. Using AN/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.
Features
- Corrects camber and caster
- Eliminates weak factory ball-joints
- Increases usable wheel travel
- These control arms are engineered to improve handling and steering response, offering a significant upgrade over standard components, particularly in maintaining proper wheel alignment.
- Made with premium materials, these control arms are designed to endure harsh driving conditions, providing reliability and reducing the need for frequent replacements.
- The control arms are tailored for off-road use, enhancing the vehicle's ability to navigate tough terrains with increased suspension travel and strength.
- Designed for compatibility with various vehicle models, these control arms are made for easy installation, allowing for quick upgrades without extensive modifications.
Notes
- Given the multitude of factors such as wheel size, offset/backspacing, tire size, brand preferences, and suspension specifics, adjustments like trimming the plastic inner fenders or modifying the body mounts behind the front tires may be necessary to prevent tire rubbing.
- May be used with most aftermarket coilovers
- May Require Trimming to Eliminate Tire Rubbing
- Nyloc Nut - 2
- Heim Spacer - Long - 4
- Heim Spacer - Short - 4
- Domed Uniball Spacer - 2
- Flanged Nut - 4
- Lock Nut - 2
- 12pt Bolt - 2
- Uniball Cover Cap O-Ring - 4
- Tapered Uniball Spindle Adaptor - 2
- 1.25" Uniball Cover Cap - 2
- Round Washer - 8
- Heim Joint - 4
- Jam Nut - 4
- Allen Bolt - 4
Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum then send them out to be bead blasted Type II anodized blue and have our Camburg logo laser etched. Like our tubular arms we use a larger FK 1"25" uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25" uniball gives us the ability to run a larger bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7/8" chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing/deflection under hard use and braking with zero binding when in use. Using AN/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.
Features
- Corrects camber and caster
- Eliminates weak factory ball-joints
- Increases usable wheel travel
- These control arms are engineered to improve handling and steering response, offering a significant upgrade over standard components, particularly in maintaining proper wheel alignment.
- Made with premium materials, these control arms are designed to endure harsh driving conditions, providing reliability and reducing the need for frequent replacements.
- The control arms are tailored for off-road use, enhancing the vehicle's ability to navigate tough terrains with increased suspension travel and strength.
- Designed for compatibility with various vehicle models, these control arms are made for easy installation, allowing for quick upgrades without extensive modifications.
Notes
- Given the multitude of factors such as wheel size, offset/backspacing, tire size, brand preferences, and suspension specifics, adjustments like trimming the plastic inner fenders or modifying the body mounts behind the front tires may be necessary to prevent tire rubbing.
- May be used with most aftermarket coilovers
- May Require Trimming to Eliminate Tire Rubbing
