Description
This entry level 4" Budget Lift Kit utilizes the factory front coil springs with a steel upper spacer. 1/4" thick steel drop brackets retain the factory radius arms with the correct caster setting for the increase ride height. A track bar relocation bracket has been designed to center the axle under the vehicle and still works properly with the factory pitman arm. This eliminates the need to replace the pitman arm resulting in a lower cost and faster installation time. Rear lift is accomplished with lift blocks and extended length u-bolts.
Run 35" tall tires with required inner fenderwell trimming for adequate tire clearance for street driving and light offroad use.
PERFORMANCE TWIN TUBE SHOCK
Fabtech Performance Shocks have been designed to work in conjunction with each of our suspension systems, resulting in superior ride control. Features include high velocity 9-stage valving for excellent dampening capabilities and a closed cell insert to reduce shock fade at high speeds.
Features
- Front Coil Spring Spacers
- Track Bar Relocation Bracket
- Rear Block and U-bolt Kit
- Twin Tube Hydraulic Construction
- 9/16" Hardened Chrome Piston Rod
- 1 3/8" OD Piston
- Closed Cell Foam insert
- High Flow 9 Stage Valving
Notes
- Non dually models only.
- Does not fit vehicles equipped with Tremor off-road package.
- Does not fit vehicles equipped with Ford onboard scale system.
Additional Information
Lift Height Range: |
3.5-4.75" |
Shocks Included: |
Yes |
Clearance Item: |
N |
MPN: |
K2404 |
Proposition 65: |
Y |
