Description
MaxTrac Suspension has a 5/3" lift kit for your Ford Ranger. MaxTrac uses lift spindles to maintain stock like geometry and keep your Ranger riding smooth, while increasing track width by half an inch. This moderate lift height provides enough clearance for much bigger wheels and tires for either a more aggressive street look, or the basis for some off-trail fun. These heavy duty 4" lift spindles are a true bolt on piece which replaces the stock spindles, and exceed OEM specifications. The ductile iron construction makes these bullet proof. Kit also comes with 1-3" torsion keys, 3" fabricated lift blocks, U-bolts as well as MaxTrac front and rear shocks
Notes
- Requires 15" rims or larger w/ 3 3/4" backspacing or less
- 16" rims or larger will work w/ 4 1/2" backspacing or less
- Fits coil spring model w/ 11.250" rotors only - Non Stabilitrak
- Clears up to a 33" x 11.50" tire on 7"-8" wide rim
- Fender trimming may be required
- MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties
- Only fits models with Torsion Bar
