Description
MaxTrac offers a 6/3" lift kit with shocks for your Chevy Silverado/GMC Sierra 1500. The Chevy/GMC 1500 2WD trucks offer easy suspension modification, allowing simple bolt on installation of these 3" lifted spindles. If you're looking to fit 32" tall tires, these spindles get the job done quickly and efficiently with no cutting or welding required, just replace the stock steering knuckles / spindles. The solid one piece ductile iron construction exceeds OEM standards, giving a smooth ride, no shock replacement required. They come with DOT approved extended brake lines , and a 3" strut spacer. The rear is accomplished with a set of 4" lift blocks to give you 3" of lift after removing the 1" factory block. Also included are U-bolts, hardware and a pair of MaxTrac shocks to accommodate the additional lift height.
Notes
- Requires 17" rims or larger w/ 4 3/4" backspacing or less
- 20" rims or larger can go up to 5 3/4" backspacing
- Factory 20" rims or larger will fit
- Clears up to a 34" x 11.50" tire on 8"-9 wide rim
- Fender trimming may be required
- Fits models w/ cast steel control arms only
- MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties
