Description
STEER SMARTS present our most EXTREME Tie Rod A Adjuster "The YETI XD Pro-Series" Aluminum Tie Rod Adjuster Tubes for JK/JKU. Select either Standard or Rubicon length.
The YETI XD Tie Rod is a direct bolt-on Upgrade for any JK Wrangler with the YETI XD Tie Rod. The YETI XD Installs just minutes and there is no need to modify or alter your Jeep.
Features
- Easy bolt-on installation.
- Engineered for proper clearance to other chassis components to eliminate interferences.
- Tie Rod adjuster is manufactured from large 1-3/4" diameter solid high strength T6 7075 Aluminum for maximum strength.
- Pro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.
- Direct replacement for Yeti XD Tie Rod with Chromoly adjuster tube
- MADE IN THE USA
Notes
- Clamps need to be torqued to 80-85 lb ft and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque needs to be checked at 500 miles, and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling/off-roading.
STEER SMARTS present our most EXTREME Tie Rod A Adjuster "The YETI XD Pro-Series" Aluminum Tie Rod Adjuster Tubes for JK/JKU. Select either Standard or Rubicon length.
The YETI XD Tie Rod is a direct bolt-on Upgrade for any JK Wrangler with the YETI XD Tie Rod. The YETI XD Installs just minutes and there is no need to modify or alter your Jeep.
Features
- Easy bolt-on installation.
- Engineered for proper clearance to other chassis components to eliminate interferences.
- Tie Rod adjuster is manufactured from large 1-3/4" diameter solid high strength T6 7075 Aluminum for maximum strength.
- Pro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.
- Direct replacement for Yeti XD Tie Rod with Chromoly adjuster tube
- MADE IN THE USA
Notes
- Clamps need to be torqued to 80-85 lb ft and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque needs to be checked at 500 miles, and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling/off-roading.
