Description
STEER SMARTS presents our most EXTREME steering linkage "The YETI XD Pro-Series" linkage for your Jeep JL/JT Wrangler/Gladiator. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.
The YETI XD Tie Rod is a direct bolt-on for any JL Wrangler or JT Gladiator. The YETI XD Tie Rod is a quick and easy install and there is no need to modify or alter Jeep.
Features
- Easy bolt-on installation.
- Engineered for proper clearance to other chassis components to eliminate interferences.
- Tie Rod adjuster is manufactured from large 1-3/4" diameter solid high strength T6 7075 Aluminum for maximum strength.
- Pro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.
- MADE IN THE USA
Notes
- Clamps need to be torqued to 80-85 lb ft and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque needs to be checked at 500 miles, and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling/off-roading.
- Requires a 1 3/4" diameter damper bracket that is not included
- Fits Rubicon, Max Tow, Mojave, 4Xe, High Altitude, 392
STEER SMARTS presents our most EXTREME steering linkage "The YETI XD Pro-Series" linkage for your Jeep JL/JT Wrangler/Gladiator. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.
The YETI XD Tie Rod is a direct bolt-on for any JL Wrangler or JT Gladiator. The YETI XD Tie Rod is a quick and easy install and there is no need to modify or alter Jeep.
Features
- Easy bolt-on installation.
- Engineered for proper clearance to other chassis components to eliminate interferences.
- Tie Rod adjuster is manufactured from large 1-3/4" diameter solid high strength T6 7075 Aluminum for maximum strength.
- Pro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.
- MADE IN THE USA
Notes
- Clamps need to be torqued to 80-85 lb ft and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque needs to be checked at 500 miles, and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling/off-roading.
- Requires a 1 3/4" diameter damper bracket that is not included
- Fits Rubicon, Max Tow, Mojave, 4Xe, High Altitude, 392
