Description
The 4" lift for the 2017-2019 Ford Super Duty 4WD is achieved via engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle/alignment. Other components included with the 4" system are: front compression travel-stop relocation brackets, track bar relocation bracket, and a steering stabilizer bracket. The rear lift is achieved with a new design fabricated rear block that allows the removal of the stock block. The kit is packaged complete with Superlift or Superlift SS shocks by Bilstein.
Install Time
8 hoursDifficulty level: 3 of 5
Notes
- If equipped with a 2 piece rear drive shaft, a carrier bearing spacer is required. Part # 9649.
- If equipped with factory top mount overload leaf, longer ubolts will be required. Part # 11724.
Additional Information
Lift Height Range: |
3.5-4.75" |
Shocks Included: |
Yes |
Clearance Item: |
N |
MPN: |
K164B |
Proposition 65: |
Y |
