Description
This Superlift lift kit is a complete replacement coil spring suspension lift kit for the Ram 2500 | 3500 that provides 5 inches of lift height. This kit includes Fox 2.0 Reservoir Shocks.
Front lift is via new, pre-set coil springs for Ram 2500 |3500. A drop pitman arm, for steering correction, works in concert with the track bar relocation bracket to ensure proper phasing. New Upper | Lower front axle-to-frame link arms restore factory alignment specifications. Front and rear suspension compression travel control is also addressed.
For rear lift, add-a-leafs are used in conjunction with blocks to strengthen the rear spring pack and control axle wrap.
Front lift is via new, pre-set coil springs for Ram 2500 |3500. A drop pitman arm, for steering correction, works in concert with the track bar relocation bracket to ensure proper phasing. New Upper | Lower front axle-to-frame link arms restore factory alignment specifications. Front and rear suspension compression travel control is also addressed.
For rear lift, add-a-leafs are used in conjunction with blocks to strengthen the rear spring pack and control axle wrap.
Features
- Track bar relocation bracket prevents the steering wheel kick and stud bind
- Fabricated Brackets constructed from .25" thick plate steel
- Heavy-duty replacement upper and lower links maintain desired caster angle and feature greaseable Urethane Bushings
- Front | Rear Compression travel stop brackets eliminate over-compression
- Drop Pitman arm relieves drag link angle to prevent bump steer | wandering
- Fox 2.0 Reservoir Shocks (Front and Rear)
- Add-a-leafs for rear
- Aligns to OEM specifications
- Backed by our Limited Lifetime Warranty
Install Time
Installation time: 7 hours
Difficulty level: 4 of 5
Difficulty level: 4 of 5
Notes
- Minor cutting and/or welding required
- Rear U-bolts fit vehicles with and without a top-mounted overload leaf. Those without overloads will have approx. 2" of excess U-bolt length (that can be trimmed). Or for shorter U-bolts, refer to block chart and replace listed block kit with the non-overload application
