Description
Features
- Springs incorporate military-wrapped spring eyes and anti-friction pads between leafs.
- Track bar relocation bracket prevents steering wheel "kick".
- New front anti-sway bar hardware maintain factory bar geometry.
- Functional front compression travel stops prevent over-compression and provide a more progressive spring rate; factory rear travel-stops are relocated.
- Rear lift via 5" blocks and add-a-leafs.
- Front / Rear shocks included.
Install Time
6 hoursDifficulty level: 3 of 5
Notes
- Will NOT fit Pre-March 1999 trucks.
- 5.4L V-8 equipped trucks will sit slightly taller than advertised lift.
- This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line for additional details.
- Rear lift based on vehicles with 2.5" tall factory. If vehicle equipped with 3.5" tall factory block expect slight rear to front rake. Front driveshaft must be lengthened.
- Part number 9641 front bumper spacer can be used on Excursions and Super-Duty pickups to allow for increased tire clearance.
Additional Information
Lift Height Range: |
8-10" |
Includes Shocks: |
Yes |
Clearance Item: |
N |
MPN: |
K644B |
Proposition 65: |
Y |
