Description
The SUPERLIFT Steering Stabilizer includes a single SUPERLIFT cylinder, plus all required mounting hardware. The SUPERLIFT cylinder features increased oil capacity, for cooler operating temperatures and less fade, plus valving tailored to meet the demands of heavier tires/wheels and aggressive terrain.
A cylinder boot, if desired, is purchased separately. SUPERLIFT shock boots also fit these cylinders.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
A cylinder boot, if desired, is purchased separately. SUPERLIFT shock boots also fit these cylinders.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
Features
-
Mounted above the tie rod providing improved protection from on and off-road hazards
Install time:
Installation time: 1 hour
Difficulty level: 1 of 5
Difficulty level: 1 of 5
Notes
- Will NOT fit stock height. The vehicle must have a minimum of 1.5" of lift for adequate clearance
- 2007-2017 Jeep Wrangler 2 Door 4WD
- 2007-2017 Jeep Wrangler 4 Door 4WD
- 2018 Jeep Wrangler JK 2 Door 4WD
- 2018 Jeep Wrangler JK 4 Door 4WD
- Pair of SUPERLIFT stabilizer cylinders, brackets, and all mounting hardware needed for installation
- Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
The SUPERLIFT Steering Stabilizer includes a single SUPERLIFT cylinder, plus all required mounting hardware. The SUPERLIFT cylinder features increased oil capacity, for cooler operating temperatures and less fade, plus valving tailored to meet the demands of heavier tires/wheels and aggressive terrain.
A cylinder boot, if desired, is purchased separately. SUPERLIFT shock boots also fit these cylinders.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
A cylinder boot, if desired, is purchased separately. SUPERLIFT shock boots also fit these cylinders.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
Features
-
Mounted above the tie rod providing improved protection from on and off-road hazards
Install time:
Installation time: 1 hour
Difficulty level: 1 of 5
Difficulty level: 1 of 5
Notes
- Will NOT fit stock height. The vehicle must have a minimum of 1.5" of lift for adequate clearance
- 2007-2017 Jeep Wrangler 2 Door 4WD
- 2007-2017 Jeep Wrangler 4 Door 4WD
- 2018 Jeep Wrangler JK 2 Door 4WD
- 2018 Jeep Wrangler JK 4 Door 4WD
