Access
Access LOMAX Professional Series Hard Folding Tonneau Cover (2024 Toyota Tacoma | 6' Bed)
- SKU:
- B0050129-LMX
- Shipping:
- Calculated at Checkout
Description
Features:
- SLEEK AND STRONG - The LOMAX Professional Series sits less than half an inch above the bed. Weighing in at roughly 60 lbs, the Professional Series can handle up to 500 lbs of evenly distributed weight, thanks to the extruded aluminum frame.
- WEATHER TIGHT SEAL - To open the cover, pull the cord from either side of the bed to disengage the cover from the latches. To close the cover, use the built-in handle to fold the cover shut. As the cover closes, it will engage at ten points to lock the cover and protect your cargo.
- EASY TO USE - Release both locks simultaneously by pulling the cord from either side. Heavy duty nylon latches provide 1/2" surface for solid positive engagement.
- SIMPLE INSTALL AND REMOVAL - Install the rails with eight no-drill, TIGHT BITE Clamps. Slide the front of the cover forward to engage the hooks, then lower into the retainment brackets. To remove, fold the cover open and secure the storage clamps. Then, disengage the hooks by pulling the latch on the front of the cover and lift the cover up.
Features:
- SLEEK AND STRONG - The LOMAX Professional Series sits less than half an inch above the bed. Weighing in at roughly 60 lbs, the Professional Series can handle up to 500 lbs of evenly distributed weight, thanks to the extruded aluminum frame.
- WEATHER TIGHT SEAL - To open the cover, pull the cord from either side of the bed to disengage the cover from the latches. To close the cover, use the built-in handle to fold the cover shut. As the cover closes, it will engage at ten points to lock the cover and protect your cargo.
- EASY TO USE - Release both locks simultaneously by pulling the cord from either side. Heavy duty nylon latches provide 1/2" surface for solid positive engagement.
- SIMPLE INSTALL AND REMOVAL - Install the rails with eight no-drill, TIGHT BITE Clamps. Slide the front of the cover forward to engage the hooks, then lower into the retainment brackets. To remove, fold the cover open and secure the storage clamps. Then, disengage the hooks by pulling the latch on the front of the cover and lift the cover up.