aFe Power Rebel Series Cat-Back Exhaust System Middle-Side Exit SS Exhaust w/ Polished Tips | 3" Inlet and 2.5" Outlet (09-18 Chevrolet/GMC 1500 | 4.3L V6 | 5.3L V8)

aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2009-2018 GM Silverado/Sierra 1500 with V6-4.3L & V8-4.8L/5.3L engine. This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" into dual 2.5" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 14 horsepower and + 17 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2014 Chevrolet Silverado V8-5.3L). This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes all necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.

3.5" Dia. Polished Middle-Side Exit Tips:

Finishing off the exhaust are dual 3.5" diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look.

Installation Is A Snap:

This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:

High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound:

A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit:

OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Notes:

aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2009-2018 GM Silverado/Sierra 1500 with V6-4.3L & V8-4.8L/5.3L engine. This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" into dual 2.5" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 14 horsepower and + 17 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2014 Chevrolet Silverado V8-5.3L). This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes all necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.

3.5" Dia. Polished Middle-Side Exit Tips:

Finishing off the exhaust are dual 3.5" diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look.

Installation Is A Snap:

This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:

High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound:

A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit:

OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Notes: