null
BDS Suspension

BDS Suspension 10" Lift Kit | NX2 Nitro Series Shocks (00-05 Ford Excursion | 4WD)

(No reviews yet) Write a Review
SKU:
BDS305H
Shipping:
Calculated at Checkout
$2,103.84

Description

Raise the bar of your Ford Excursion 4WD by installing this 10-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 38" tires.

Up front the lift kit includes Glide-Ride leaf springs forged drop pitman arm and track bar bracket for steering correction sway bar links bump stop brackets and precision tuned NX2 nitrogen charged shocks.

In the rear the base kit utilizes replacement Glide-Ride full leaf spring packs u-bolts and a matching set of NX2 Nitro Performance shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Glideride leaf springs to provide full lift height and increased capacity
  • Track bar relocation bracket and pitman arm maintains proper steering angles for improved handling
  • Cast steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Models with rear CV style driveshaft may experience drive line vibration.
  • If your vehicle is equipped with a rear anti-sway bar you should consider the rear sway bar links available in the options section.
  • Front and rear driveshaft modification will be required.
  • Due to variance from the factory in rear block height it may be necessary to change the factory block to achieve a desired stance.
Raise the bar of your Ford Excursion 4WD by installing this 10-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 38" tires.

Up front the lift kit includes Glide-Ride leaf springs forged drop pitman arm and track bar bracket for steering correction sway bar links bump stop brackets and precision tuned NX2 nitrogen charged shocks.

In the rear the base kit utilizes replacement Glide-Ride full leaf spring packs u-bolts and a matching set of NX2 Nitro Performance shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Glideride leaf springs to provide full lift height and increased capacity
  • Track bar relocation bracket and pitman arm maintains proper steering angles for improved handling
  • Cast steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Models with rear CV style driveshaft may experience drive line vibration.
  • If your vehicle is equipped with a rear anti-sway bar you should consider the rear sway bar links available in the options section.
  • Front and rear driveshaft modification will be required.
  • Due to variance from the factory in rear block height it may be necessary to change the factory block to achieve a desired stance.
View AllClose

Additional Information

View AllClose

Related Products

Related Products