BDS Suspension

BDS Suspension 2.5" Lift Kit | Fox 2.5 Performance Elite Coil-Over Conversion | 4 Inch Block Kit (11-16 Ford F-250/F-350 Super Duty | 4WD | Diesel)

(No reviews yet) Write a Review

SKU:: BDS1510FPE
UPC:
MPN:
Shipping:: Calculated at Checkout

$3,871.30

Current Stock:

Quantity:

Description
Additional Information

Description

Improve the ride, up the ante, and level out your 2011-2016 Ford F250 and F350 Super Duty diesel powered truck with this 2.5-inch radius arm lift kit and FOX Performance Elite coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, high strength 1-3/8 inch solid steel track bar for steering correction, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

HD Adjustable Track Bar

Maintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3/8" solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.

Features

FOX 2.5 Coil-Over mounts in factory coil bucket location
BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
Adds additional secondary FOX 2.0 shock for max performance
Eibach coil springs ride smooth through the roughest terrain
Adjustable solid steel track bar designed to recenter the front axle
Fabricated steel blocks provide level stance from front to rear
FOX shocks are fully serviceable and resistant to corrosion and harsh environments.
4 Inch Block Kit: Level stance

Notes

Exhaust modification may be required to clear the front driveshaft (gas only)
Front bumper spacer kit may be required to run 38"x15.50" tires
Although extremely rare, front driveline vibration may occur
If equipped with 2-piece rear driveshaft, a driveshaft alignment kit (#123406) will be required
Front driveshaft u-joints may max out at full droop. If so, a new front shaft will be required.
If equipped with a rear sway bar, #123009 is required.
U-bolts will not work on dually.
Front auxiliary shocks can be omitted from kit - the system can be used with C/O installed alone
BDS leaf springs are not intended for use beyond the truck's maximum payload capacity. Trucks equipped with overload springs will only have the capacity of a non-overload equipped truck. If heavy payload use is desired, supplemental rear airbags are recommended.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.

FOX Performance Elite Coil-Over

HD Adjustable Track Bar

Features

FOX 2.5 Coil-Over mounts in factory coil bucket location
BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
Adds additional secondary FOX 2.0 shock for max performance
Eibach coil springs ride smooth through the roughest terrain
Adjustable solid steel track bar designed to recenter the front axle
Fabricated steel blocks provide level stance from front to rear
FOX shocks are fully serviceable and resistant to corrosion and harsh environments.
4 Inch Block Kit: Level stance

Notes

Exhaust modification may be required to clear the front driveshaft (gas only)
Front bumper spacer kit may be required to run 38"x15.50" tires
Although extremely rare, front driveline vibration may occur
If equipped with 2-piece rear driveshaft, a driveshaft alignment kit (#123406) will be required
Front driveshaft u-joints may max out at full droop. If so, a new front shaft will be required.
If equipped with a rear sway bar, #123009 is required.
U-bolts will not work on dually.
Front auxiliary shocks can be omitted from kit - the system can be used with C/O installed alone
BDS leaf springs are not intended for use beyond the truck's maximum payload capacity. Trucks equipped with overload springs will only have the capacity of a non-overload equipped truck. If heavy payload use is desired, supplemental rear airbags are recommended.

View AllClose