null
BDS Suspension

BDS Suspension 2.5" Lift Kit | NX2 Nitro Series Rear Shocks (19-23 Ford Ranger | 4WD)

(No reviews yet) Write a Review
SKU:
BDS1546H
Shipping:
Calculated at Checkout
$333.24

Description

Properly level the front of your Ford Ranger truck by installing this 2.5-inch leveling kit from BDS. Specially designed for the new Ranger this 2.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.

To prevent maxing out ball joints or CV damage BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates.

The lift kit includes steel top mount strut spacers pre-load spacers differential relocation brackets and custom-tuned NX2 Nitro Performance series shocks. Give your new Ranger the extra boost with this 2.5" leveling kit from BDS Suspension.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Maintains factory like ride quality
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish.

Notes

  • Aftermarket wheels must have a minimum of 93.1mm center hub bore.
  • Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
  • Will NOT work on trucks equipped with cast steel steering knuckles
Properly level the front of your Ford Ranger truck by installing this 2.5-inch leveling kit from BDS. Specially designed for the new Ranger this 2.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.

To prevent maxing out ball joints or CV damage BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates.

The lift kit includes steel top mount strut spacers pre-load spacers differential relocation brackets and custom-tuned NX2 Nitro Performance series shocks. Give your new Ranger the extra boost with this 2.5" leveling kit from BDS Suspension.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Maintains factory like ride quality
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish.

Notes

  • Aftermarket wheels must have a minimum of 93.1mm center hub bore.
  • Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
  • Will NOT work on trucks equipped with cast steel steering knuckles
View AllClose

Related Products

Related Products