null
BDS Suspension

BDS Suspension 3.5" Lift Kit | Cast Aluminum | Fox 2.0 Performance Series Shocks (19-23 Ford Ranger | 4WD)

(No reviews yet) Write a Review
SKU:
BDS1545FS
Shipping:
Calculated at Checkout
$1,459.06

Description

Improve the performance and style of your Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger this 3.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.

To prevent maxing out ball joints or CV damage BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.

Up front the lift kit includes steel top mount strut spacers pre-load spacers differential relocation brackets and tubular upper control arms. In the rear this kit includes heavy duty lift shackles and custom-tuned FOX Performance series shocks.

HD Upper Control Arms (UCAs)

Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Features

  • Easy 100% Bolt-on installation
  • Maintains factory like ride quality
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Large 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • Aftermarket wheels must have a minimum of 93.1mm center hub bore.
  • Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
  • Will NOT work on trucks equipped with cast steel steering knuckles
Improve the performance and style of your Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger this 3.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.

To prevent maxing out ball joints or CV damage BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.

Up front the lift kit includes steel top mount strut spacers pre-load spacers differential relocation brackets and tubular upper control arms. In the rear this kit includes heavy duty lift shackles and custom-tuned FOX Performance series shocks.

HD Upper Control Arms (UCAs)

Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Features

  • Easy 100% Bolt-on installation
  • Maintains factory like ride quality
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Large 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • Aftermarket wheels must have a minimum of 93.1mm center hub bore.
  • Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
  • Will NOT work on trucks equipped with cast steel steering knuckles
View AllClose

Related Products

Related Products