null
BDS Suspension

BDS Suspension 3.5" Lift Kit |Heavy Duty Leaf Springs (87-95 Jeep Wrangler YJ)

(No reviews yet) Write a Review
SKU:
BDS410H
Shipping:
Calculated at Checkout
$1,048.76

Description

Designed to improve stance performance and capability. BDS Suspension has designed this 3.5-inch lift kit for your Jeep Wrangler YJ. This kit includes everything necessary to set your truck up right with clearance for up to 33" tires.

This 3.5-inch lift kit includes front and rear Glide-Ride leaf springs with new u-bolts front and rear track bar relocation brackets to center the axle brake line brackets power steering pitman arm bump stop extensions and a transfer case drop kit to ease the drive line angles. Round out this kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. These spring feature tapered leafs anti-friction pads bolt style leaf alignment clamps and a full military wrap to protect your spring eyes from the rocks. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Glideride leaf springs to provide full lift height and increased capacity
  • Front and rear track bar relocation brackets to center the axle
  • Transfer case drop kit to ease the drive line angles
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Easy 100% Bolt-on installation
  • Heavy Duty Leaf Springs - Use these springs if you plan to run additional weight beyond the stock spare and a soft top. A must for hard top applications and will still ride great when you take your hard top off.

Notes

  • May require driveshaft lengthening for 13" (u-joint to u-joint) driveshaft.
  • May require larger diameter driveshaft if equipped with a 41-1/2" front driveshaft.
  • Extended shackles recommended to clear military wrap.
  • Models with accessories like hardtop rear tire carrier roof rack etc. should use #004351 springs on front and rear.
  • When combining lifted shackles with a 3.5" suspension system a tail shaft eliminator kit and a "CV" style rear driveshaft may be required to eliminate driveline vibration.
  • Pitman arms will NOT fit Yj models equiped with manual steering.
Designed to improve stance performance and capability. BDS Suspension has designed this 3.5-inch lift kit for your Jeep Wrangler YJ. This kit includes everything necessary to set your truck up right with clearance for up to 33" tires.

This 3.5-inch lift kit includes front and rear Glide-Ride leaf springs with new u-bolts front and rear track bar relocation brackets to center the axle brake line brackets power steering pitman arm bump stop extensions and a transfer case drop kit to ease the drive line angles. Round out this kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. These spring feature tapered leafs anti-friction pads bolt style leaf alignment clamps and a full military wrap to protect your spring eyes from the rocks. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Glideride leaf springs to provide full lift height and increased capacity
  • Front and rear track bar relocation brackets to center the axle
  • Transfer case drop kit to ease the drive line angles
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Easy 100% Bolt-on installation
  • Heavy Duty Leaf Springs - Use these springs if you plan to run additional weight beyond the stock spare and a soft top. A must for hard top applications and will still ride great when you take your hard top off.

Notes

  • May require driveshaft lengthening for 13" (u-joint to u-joint) driveshaft.
  • May require larger diameter driveshaft if equipped with a 41-1/2" front driveshaft.
  • Extended shackles recommended to clear military wrap.
  • Models with accessories like hardtop rear tire carrier roof rack etc. should use #004351 springs on front and rear.
  • When combining lifted shackles with a 3.5" suspension system a tail shaft eliminator kit and a "CV" style rear driveshaft may be required to eliminate driveline vibration.
  • Pitman arms will NOT fit Yj models equiped with manual steering.
View AllClose

Additional Information

View AllClose

Related Products

Related Products