null
BDS Suspension

BDS Suspension 3" Lift Kit | NX2 Nitro Series Shocks | Fixed Links (12-18 Jeep Wrangler JK | 4 Door)

(No reviews yet) Write a Review
SKU:
BDS1404H
Shipping:
Calculated at Checkout
$707.14

Description

Upgrade the ride and style of your Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes 3" Pro-Ride coil springs capable of full coil bind and 2" bump stop extensions to control the compression travel but increase wheel travel. Also included are brake line brackets alignment cams to fine tune front caster angles and sway bar links.

In the rear the kit utilizes Pro-Ride coil springs sway bar drop brackets and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3" lift kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Features

  • ProRide coil springs offer improved ride quality and more articulation
  • Sway bar quicker disconnects and extended rear link for improved offroad flex
  • Rear track bar bracket repositions rear axle under vehicle
  • Lower cam locks to correct caster for alignment
  • NX2 gas series shocks for improved damping
  • Allows clearance for 35" tires
  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish
  • Required for use on Rubicon models with electronic disconnect.
  • Improves handling with proper sway bar operating angle
  • Heavy-duty steel construction with zinc finish
  • Polyurethane hourglass bushings for long life and quiet operation
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish
  • Fixed Links: Required for use on Rubicon models with electronic disconnect, Improves handling with proper sway bar operating angle, Heavy-duty steel construction with zinc finish, Polyurethane hourglass bushings for long life and quiet operation

Notes

  • Exhaust modification may be required.
  • This kit is FMVSS No.126 Compliant
  • This kit is right-hand drive compatible. Follow right-hand drive installation instructions when installing this kit on a right-hand drive vehicle.
  • If using these rear sway bar links the sway bar drop will not need to be installed. This also requires a wheel with 4.5" backspacing or less for tire clearance.
Upgrade the ride and style of your Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes 3" Pro-Ride coil springs capable of full coil bind and 2" bump stop extensions to control the compression travel but increase wheel travel. Also included are brake line brackets alignment cams to fine tune front caster angles and sway bar links.

In the rear the kit utilizes Pro-Ride coil springs sway bar drop brackets and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3" lift kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Features

  • ProRide coil springs offer improved ride quality and more articulation
  • Sway bar quicker disconnects and extended rear link for improved offroad flex
  • Rear track bar bracket repositions rear axle under vehicle
  • Lower cam locks to correct caster for alignment
  • NX2 gas series shocks for improved damping
  • Allows clearance for 35" tires
  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish
  • Required for use on Rubicon models with electronic disconnect.
  • Improves handling with proper sway bar operating angle
  • Heavy-duty steel construction with zinc finish
  • Polyurethane hourglass bushings for long life and quiet operation
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish
  • Fixed Links: Required for use on Rubicon models with electronic disconnect, Improves handling with proper sway bar operating angle, Heavy-duty steel construction with zinc finish, Polyurethane hourglass bushings for long life and quiet operation

Notes

  • Exhaust modification may be required.
  • This kit is FMVSS No.126 Compliant
  • This kit is right-hand drive compatible. Follow right-hand drive installation instructions when installing this kit on a right-hand drive vehicle.
  • If using these rear sway bar links the sway bar drop will not need to be installed. This also requires a wheel with 4.5" backspacing or less for tire clearance.
View AllClose

Additional Information

View AllClose

Related Products

Related Products