BDS Suspension 3" Lift Kit w/ Radius Arm | 2.5 FPE (20-22 Ford F-250/350 Super Duty | 4WD | Diesel)

Notes

• Designed for use on diesel models but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).
• Larger tires on stock wheels are not recommended due to the brake line clearance required. Use recommended specifications listed in the tire and wheel fitment section.
• Installation requires a torque wrench capable of 405 ft-lbs.
• Due to the taller factory ride height Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
• Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure BDS recommends having this performed prior to installing the lift.
• Trucks without top-mounted overload springs require (x4) UBT4031 available to purchase separately.
• Recommended Tires & Wheels - Trimming may be required:
• 35 x 12.5 with 17 x 9 and 5 in.
• 35 x 12.5 with 18 x 9 and 5 in.
• 35 x 12.5 with 20 x 9 and 5 in.

Features

• Easy 100% Bolt-on installation
• Pro-Ride dual rate coil springs ride smooth through any terrain
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
• Adjustable solid steel track bar designed to recenter the front axle
• Fabricated steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
• Front Lift Method : Coil Spring
• Rear Lift Method : Block
• Shocks Included : Yes
• Front Lift Height : 3"
• Rear Lift Height : 1"

Notes

• Designed for use on diesel models but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).
• Larger tires on stock wheels are not recommended due to the brake line clearance required. Use recommended specifications listed in the tire and wheel fitment section.
• Installation requires a torque wrench capable of 405 ft-lbs.
• Due to the taller factory ride height Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
• Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure BDS recommends having this performed prior to installing the lift.
• Trucks without top-mounted overload springs require (x4) UBT4031 available to purchase separately.
• Recommended Tires & Wheels - Trimming may be required:
• 35 x 12.5 with 17 x 9 and 5 in.
• 35 x 12.5 with 18 x 9 and 5 in.
• 35 x 12.5 with 20 x 9 and 5 in.