null
BDS Suspension

BDS Suspension 4.5" Lift Kit | Light Duty Rear Leaf Springs (87-95 Jeep Wrangler YJ)

(No reviews yet) Write a Review
SKU:
BDS411H
Shipping:
Calculated at Checkout
$1,421.28

Description

Designed to improve stance performance and capability. BDS Suspension has designed this 4.5-inch lift kit for your Jeep Wrangler YJ. This kit includes everything necessary to set your truck up right with clearance for up to 33" tires.

This 4.5-inch lift kit includes front and rear Glide-Ride leaf springs with new u-bolts front and rear track bar relocation brackets to center the axle stainless steel braided brake lines sway bar disconnects power steering pitman arm bump stop extensions a transfer case drop kit to ease the drive line angles and 1" extended shackles to let your springs really flex. Round out this kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. These spring feature tapered leafs anti-friction pads bolt style leaf alignment clamps and a full military wrap to protect your spring eyes from the rocks. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Glideride leaf springs to provide full lift height and increased capacity
  • Front and rear track bar relocation brackets to center the axle
  • Transfer case drop kit to ease the drive line angles
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Easy 100% Bolt-on installation
  • Select the appropriate rear springs based on the weight of your vehicle and hard top vs. soft top, Light Duty Leaf Springs - Use these light-duty springs if you have a soft top and plan to either run with the stock spare or no spare at all.

Notes

  • May require driveshaft lengthening if equipped with 13"( u-joint to u-joint) driveshaft.
  • May require larger diameter driveshaft if equipped with a 41-1/2" front driveshaft.
  • If you have a heavy Jeep (ie. Hard top with full size spare) you will want to run the front springs on both the front and rear. This selection can be made in the customize section before checking out.
  • A slip yoke eliminator and dual cardan style rear driveshaft may be required to eliminate drive line vibration.
  • Pitman arms will NOT fit Yj models equiped with manual steering.
Designed to improve stance performance and capability. BDS Suspension has designed this 4.5-inch lift kit for your Jeep Wrangler YJ. This kit includes everything necessary to set your truck up right with clearance for up to 33" tires.

This 4.5-inch lift kit includes front and rear Glide-Ride leaf springs with new u-bolts front and rear track bar relocation brackets to center the axle stainless steel braided brake lines sway bar disconnects power steering pitman arm bump stop extensions a transfer case drop kit to ease the drive line angles and 1" extended shackles to let your springs really flex. Round out this kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. These spring feature tapered leafs anti-friction pads bolt style leaf alignment clamps and a full military wrap to protect your spring eyes from the rocks. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Glideride leaf springs to provide full lift height and increased capacity
  • Front and rear track bar relocation brackets to center the axle
  • Transfer case drop kit to ease the drive line angles
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Easy 100% Bolt-on installation
  • Select the appropriate rear springs based on the weight of your vehicle and hard top vs. soft top, Light Duty Leaf Springs - Use these light-duty springs if you have a soft top and plan to either run with the stock spare or no spare at all.

Notes

  • May require driveshaft lengthening if equipped with 13"( u-joint to u-joint) driveshaft.
  • May require larger diameter driveshaft if equipped with a 41-1/2" front driveshaft.
  • If you have a heavy Jeep (ie. Hard top with full size spare) you will want to run the front springs on both the front and rear. This selection can be made in the customize section before checking out.
  • A slip yoke eliminator and dual cardan style rear driveshaft may be required to eliminate drive line vibration.
  • Pitman arms will NOT fit Yj models equiped with manual steering.
View AllClose

Related Products

Related Products