null
BDS Suspension

BDS Suspension 4.5" Lift Kit | Long Arm | Dana 35 Rear Axle | NX2 Nitro Series Shocks (84-01 Jeep Cherokee)

(No reviews yet) Write a Review
SKU:
BDS1428H
Shipping:
Calculated at Checkout
$2,523.12

Description

Maximize the capability of your Jeep Cherokee XJ with this 4.5-inch lift kit with long arm conversion from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 32" tires. By maximizing the length of both the upper and lower control arms BDS has minimized caster change for optimal handling and minimized road forces. The control arm geometry is setup with a massive belly pan that incorporates the link mounts and is built to smash rocks. Believe it or not this system is completely bolt-on with no welding to the unibody required!

Up front the lift kit includes a belly pan with new pivot mounts heavy duty lower flex arms and adjustable upper flex arms to optimize handling characteristics 4.5" Pro-Ride coil springs capable of full coil bind and bump stop extensions to control the compression travel but increase wheel travel. Also included are braided stainless steel brake lines ultimate sway bar disconnects and front adjustable track bar with flex joint fits into the existing frame mount to improve the steering and handling geometry.

The rear kit utilizes Glide-Ride leaf springs for maximum travel and stainless braided brake line to allow the springs to flex. Finish off the kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Long Arm Conversion

Upgrading the standard control arms to a long arm adds strength improves handling and takes offroad articulation to the next level. This upgrade consists of massive 1/4" steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation.

Pro-Ride Coil Springs

A pair of full-length Jeep-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Features

  • Redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • ProRide coil springs offer improved ride quality and more articulation
  • Massive belly pan that incorporates the link mounts and is built to smash rocks
  • Glideride leaf springs to provide full lift height and increased capacity
  • Sway bar quicker disconnects and extended rear link for improved offroad flex
  • Front HD track bar to correctly position the front axle and control lateral movement
  • NX2 gas shocks for improved damping
  • Easy 100% Bolt-on installation
  • Allows clearance for 32" tires
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Measure the rear u-bolts before ordering. Some XJ's are equipped with a Dana 44 rear axle.
  • CV style rear driveshaft (not included) and slip yoke eliminator kit is required.
  • System only works with 4.0L motor and automatic transmission.
  • '96 and earlier models may require a longer emergency brake cable.
Maximize the capability of your Jeep Cherokee XJ with this 4.5-inch lift kit with long arm conversion from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 32" tires. By maximizing the length of both the upper and lower control arms BDS has minimized caster change for optimal handling and minimized road forces. The control arm geometry is setup with a massive belly pan that incorporates the link mounts and is built to smash rocks. Believe it or not this system is completely bolt-on with no welding to the unibody required!

Up front the lift kit includes a belly pan with new pivot mounts heavy duty lower flex arms and adjustable upper flex arms to optimize handling characteristics 4.5" Pro-Ride coil springs capable of full coil bind and bump stop extensions to control the compression travel but increase wheel travel. Also included are braided stainless steel brake lines ultimate sway bar disconnects and front adjustable track bar with flex joint fits into the existing frame mount to improve the steering and handling geometry.

The rear kit utilizes Glide-Ride leaf springs for maximum travel and stainless braided brake line to allow the springs to flex. Finish off the kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Long Arm Conversion

Upgrading the standard control arms to a long arm adds strength improves handling and takes offroad articulation to the next level. This upgrade consists of massive 1/4" steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation.

Pro-Ride Coil Springs

A pair of full-length Jeep-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Features

  • Redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • ProRide coil springs offer improved ride quality and more articulation
  • Massive belly pan that incorporates the link mounts and is built to smash rocks
  • Glideride leaf springs to provide full lift height and increased capacity
  • Sway bar quicker disconnects and extended rear link for improved offroad flex
  • Front HD track bar to correctly position the front axle and control lateral movement
  • NX2 gas shocks for improved damping
  • Easy 100% Bolt-on installation
  • Allows clearance for 32" tires
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Measure the rear u-bolts before ordering. Some XJ's are equipped with a Dana 44 rear axle.
  • CV style rear driveshaft (not included) and slip yoke eliminator kit is required.
  • System only works with 4.0L motor and automatic transmission.
  • '96 and earlier models may require a longer emergency brake cable.
View AllClose

Additional Information

View AllClose

Related Products

Related Products