null
BDS Suspension

BDS Suspension 4" Lift Kit | 2" Block Kit | NX2 Nitro Series Shocks (13-18 Ram 3500 | 4WD | Gas)

(No reviews yet) Write a Review
SKU:
BDS1779H
Shipping:
Calculated at Checkout
$1,175.67

Description

Improve the ride and style of your RAM 3500 gas powered truck with this 4-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs radius arms drop brackets forged drop pitman arm and track bar bracket for steering correction bump stops brake line brackets and precision tuned NX2 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Heavy duty radius arm drop brackets maintain proper suspension geometry
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS NX2 gas shocks to improved ride and offroad performance
  • Block Kit: Blocks are made from cast iron for strength, Tapered for correct pinion angle, Steel pin and hole are offset to restore axle position.
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • The carrier-bearing drop kit is necessary for models equipped with two-piece rear drive shaft.
  • 6.4L Gas models will require exhaust modification to clear the front driveshaft and potentially the passenger's Radius arm bracket.
  • 5.7L Gas models may require exhaust modification - but not in all cases.
  • The vehicle can be driven without the front driveshaft to an exhaust shop for modification and reinstalled after modification.
Improve the ride and style of your RAM 3500 gas powered truck with this 4-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs radius arms drop brackets forged drop pitman arm and track bar bracket for steering correction bump stops brake line brackets and precision tuned NX2 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Heavy duty radius arm drop brackets maintain proper suspension geometry
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS NX2 gas shocks to improved ride and offroad performance
  • Block Kit: Blocks are made from cast iron for strength, Tapered for correct pinion angle, Steel pin and hole are offset to restore axle position.
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • The carrier-bearing drop kit is necessary for models equipped with two-piece rear drive shaft.
  • 6.4L Gas models will require exhaust modification to clear the front driveshaft and potentially the passenger's Radius arm bracket.
  • 5.7L Gas models may require exhaust modification - but not in all cases.
  • The vehicle can be driven without the front driveshaft to an exhaust shop for modification and reinstalled after modification.
View AllClose

Additional Information

View AllClose

Related Products

Related Products