null
BDS Suspension

BDS Suspension 4" Lift Kit | 4" Rear Block w/ Add-A-Leaf | FOX 2.0 Performance Series Shocks (80-87 Chevy K10/V10 | 4WD)

(No reviews yet) Write a Review
SKU:
BDS125FS
Shipping:
Calculated at Checkout
$1,495.16

Description

Improve the style and handling of your Chevy and GMC 1/2 ton truck or SUV with this 4-inch lift kit from BDS Suspension. Designed to improve stance performance and capability of the K5 Blazer K10 and K15 this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes Glide-Ride leaf springs 4" steering arm for steering correction brake line brackets and precision tuned FOX 2.0 Performance Series Shocks In the rear this kit utilizes a high-strength lift block longer u-bolts and a matching set of FOX Performance shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Glideride leaf springs to provide full lift height and increased capacity
  • New steering arm maintains proper steering angles for improved handling
  • Cast steel blocks and add-a-leaf provide level stance from front to rear
  • 4 Inch Block Kit with Add-A-Leaf: Help freshen up old worn-out factory leaf springs, Provides an additional 1 inch of lift, Includes new center pins.
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • The 1/2 ton commonly came with a factory 52" eye to eye rear leaf spring. However some were produced with a 56" rear spring. If ordering rear leaf springs be sure to measure your factory rear spring before ordering.
  • If equipped with a factory front sway bar order the front sway bar shackle link kit listed in the accessories section.
  • Some vehicle came with factory front dual shocks. If you wish to replace the factory duals you must order the additional two auxiliary shocks in the options.
  • #001408 come with OE style rubber bushings installed.
  • Exhaust modification may be required to clear front driveshaft.
Improve the style and handling of your Chevy and GMC 1/2 ton truck or SUV with this 4-inch lift kit from BDS Suspension. Designed to improve stance performance and capability of the K5 Blazer K10 and K15 this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes Glide-Ride leaf springs 4" steering arm for steering correction brake line brackets and precision tuned FOX 2.0 Performance Series Shocks In the rear this kit utilizes a high-strength lift block longer u-bolts and a matching set of FOX Performance shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Glideride leaf springs to provide full lift height and increased capacity
  • New steering arm maintains proper steering angles for improved handling
  • Cast steel blocks and add-a-leaf provide level stance from front to rear
  • 4 Inch Block Kit with Add-A-Leaf: Help freshen up old worn-out factory leaf springs, Provides an additional 1 inch of lift, Includes new center pins.
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • The 1/2 ton commonly came with a factory 52" eye to eye rear leaf spring. However some were produced with a 56" rear spring. If ordering rear leaf springs be sure to measure your factory rear spring before ordering.
  • If equipped with a factory front sway bar order the front sway bar shackle link kit listed in the accessories section.
  • Some vehicle came with factory front dual shocks. If you wish to replace the factory duals you must order the additional two auxiliary shocks in the options.
  • #001408 come with OE style rubber bushings installed.
  • Exhaust modification may be required to clear front driveshaft.
View AllClose

Related Products

Related Products