null
BDS Suspension

BDS Suspension 4" Lift Kit | Long Arm | Rear Block | 4" Rear Axle | NX2 Nitro Series Shocks (2008 Dodge Ram 2500 Power Wagon | 4WD | Gas)

(No reviews yet) Write a Review
SKU:
BDS667H
Shipping:
Calculated at Checkout
$2,091.36

Description

Built to outperform BDS Suspension engineered a 4-inch lift kit with long arm conversion for your Dodge RAM 2500 Power Wagon that maximizes performance on and off road. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 37" tires. BDS built the long lower control arms to reduce caster change through wheel travel which creates a more controlled feeling in the steering wheel. This long arm long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system.

Up front the lift kit includes gas-specific Pro-Ride coil springs all four control arms plus mounting bracket forged drop pitman arm and track bar bracket for steering correction bump stops sway bar links and precision tuned NX2 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks longer u-bolts and a matching set of NX2 Nitro shocks.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Tubular long arms reduce caster change and create more controlled feeling on and off road
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Heavy duty control arm brackets maintain proper suspension geometry
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS NX2gas shocks to improved ride and offroad performance
  • Axle Diameter: The Dodge Ram truck has 2 different rear axle diameters. Please measure your rear axle and select the appropriate rear kit for your vehicle.
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish
  • Block Kit: Blocks are made from cast iron for strength, Tapered for correct pinion angle, Steel pin and hole are offset to restore axle position.

Notes

  • These vehicles were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter.
  • Depending on the factory transmission mount some 4" kits may require the transfer case indexing kit if a driveline vibration persists. See installation instructions for details.
View AllClose

Additional Information

Universal Product:
Yes
View AllClose

Related Products

Related Products