null
BDS Suspension

BDS Suspension 4" Lift Kit w/4-Link | Block Kit w/Factory Overload | Fox 2.0 Performance Series Shocks (05-07 Ford F-250/F-350 Super Duty | 4WD | Gas)

(No reviews yet) Write a Review
SKU:
BDS330FS
Shipping:
Calculated at Checkout
$2,701.01

Description

Raise the height of your Ford F250 and F350 Super Duty gas truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Up front the lift kit includes gas-specific Pro-Ride coil springs 4-link control arms with conversion brackets forged drop pitman arm and track bar bracket for steering correction sway bar relocation brake line brackets and precision tuned nitrogen charged shocks.

In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length gas-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Steering Correction

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty 4-Link control arms offer improved handling stability strength and caster control during wheel travel
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Large 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish
  • Block Kit: Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs. Blocks made of steel for high strength. Designed to provide correct pinion angles.

Notes

  • These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
  • Removal of O.E. block in the rear is required.
  • Front dual shock hoop requires different cylinders than what comes in the base kit.
  • If equipped with 2 piece driveshaft a driveshaft alignment kit may be required.
Raise the height of your Ford F250 and F350 Super Duty gas truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Up front the lift kit includes gas-specific Pro-Ride coil springs 4-link control arms with conversion brackets forged drop pitman arm and track bar bracket for steering correction sway bar relocation brake line brackets and precision tuned nitrogen charged shocks.

In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length gas-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Steering Correction

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty 4-Link control arms offer improved handling stability strength and caster control during wheel travel
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Large 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish
  • Block Kit: Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs. Blocks made of steel for high strength. Designed to provide correct pinion angles.

Notes

  • These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
  • Removal of O.E. block in the rear is required.
  • Front dual shock hoop requires different cylinders than what comes in the base kit.
  • If equipped with 2 piece driveshaft a driveshaft alignment kit may be required.
View AllClose

Related Products

Related Products