BDS Suspension

BDS Suspension 4" Lift Kit w/4-Link | Block Kit w/Factory Overload | Fox 2.0 Performance Series Shocks (08-10 Ford F-250/F-350 Super Duty | 4WD | Diesel)

(No reviews yet) Write a Review

SKU:: BDS549FS
UPC:
MPN:
Shipping:: Calculated at Checkout

$2,735.57

Current Stock:

Quantity:

Description
Additional Information

Description

Raise the height of your Ford F250 and F350 Super Duty diesel truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs 4-link control arms with conversion brackets forged drop pitman arm and track bar bracket for steering correction sway bar relocation brake line brackets and precision tuned nitrogen charged shocks.

In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length diesel-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

Easy 100% Bolt-on installation
Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
Heavy duty 4-Link control arms offer improved handling stability strength and caster control during wheel travel
Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
Fabricated steel blocks provide level stance from front to rear
FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Large 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish
Block Kit: Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs. Blocks made of steel for high strength. Designed to provide correct pinion angles.

Notes

These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
If your vehicle is equipped with a carrier bearing you will need to order 123402 in the accessories section.
Removal of factory block required.
Front exhaust modification may be required to clear the front driveshaft on gas models.
U-bolts will not fit dually models.
Dropped pitman arm will not fit 10 lug widetrack F350 models.