BDS Suspension 4" Lift Kit W/ Radius Arm | 2.5 FPE (17-19 Ford F-350 Super Duty | 4WD | Gas | DRW)

Notes

• Removal of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.
• If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
• Torque wrench capable of 405 ft-lbs required.
• Recommended Tires & Wheels - Trimming may be required:
• 37 x 12.5 with 17 x 9 and 5 in.
• 37 x 12.5 with 18 x 9 and 5 in.
• 37 x 12.5 with 20 x 9 and 5 in.

Features

• Easy, 100% Bolt-on installation
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Fabricated steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
• Front Lift Method : Coil Spring
• Rear Lift Method : Block
• Shocks Included : Yes
• Front Lift Height : 4"
• Rear Lift Height : 3"

Notes

• Removal of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.
• If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
• Torque wrench capable of 405 ft-lbs required.
• Recommended Tires & Wheels - Trimming may be required:
• 37 x 12.5 with 17 x 9 and 5 in.
• 37 x 12.5 with 18 x 9 and 5 in.
• 37 x 12.5 with 20 x 9 and 5 in.