null
BDS Suspension

BDS Suspension 4" Lift Kit W/ Radius Arm | 2.5 FPE | W/ Factory Rear Overload Leaf (19-24 Ram 3500 | 4WD | Gas)

(No reviews yet) Write a Review
SKU:
BDS1703FPE
Shipping:
Calculated at Checkout
$4,813.32

Description

Raise your RAM 3500 gas powered truck to the next heights with this 4-inch lift kit with Radius Arm conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, and conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength steel lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Features

  • Front Lift Method : Radius Arm
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 2"

Notes

  • ADEF tank relocation bracket(part# 122409)is required for this kit to work with Dually or Mega Cab Models with Aisin Transmissions (8-bolt).
  • Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop.
  • Vehicles equipped with a Manual T-case requires BDS122422 Manual transfer case shifter extension.
  • Vehicles equipped with a 2-piece rear drive shaft (carrier bearing) require BDS122406 Carrier bearing drop.
Raise your RAM 3500 gas powered truck to the next heights with this 4-inch lift kit with Radius Arm conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, and conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength steel lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Features

  • Front Lift Method : Radius Arm
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 2"

Notes

  • ADEF tank relocation bracket(part# 122409)is required for this kit to work with Dually or Mega Cab Models with Aisin Transmissions (8-bolt).
  • Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop.
  • Vehicles equipped with a Manual T-case requires BDS122422 Manual transfer case shifter extension.
  • Vehicles equipped with a 2-piece rear drive shaft (carrier bearing) require BDS122406 Carrier bearing drop.
View AllClose

Additional Information

View AllClose

Related Products

Related Products