null
BDS Suspension

BDS Suspension 5.5" Lift Kit W/ Radius Arm | NX2 Nitro Series Shocks | For Rear Air Ride (13-18 Ram 3500 | 4WD | Gas)

(No reviews yet) Write a Review
SKU:
BDS2107H
Shipping:
Calculated at Checkout
$2,145.21

Description

6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.

Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement

DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits

Features

  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Heavy duty tubular radius arms improve strength handling and caster control
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas shocks to improved ride and offroad performance
6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.

Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement

DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits

Features

  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Heavy duty tubular radius arms improve strength handling and caster control
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas shocks to improved ride and offroad performance
View AllClose

Additional Information

View AllClose

Related Products

Related Products