null
BDS Suspension

BDS Suspension 6" Lift Kit | 4" Block Kit | 4" Axle | FOX 2.0 Performance Series Shocks (03-07 Dodge Ram 1500/2500/3500 | 4WD | Gas)

(No reviews yet) Write a Review
SKU:
BDS269FS
Shipping:
Calculated at Checkout
$1,939.83

Description

Improve the ride and style of your Dodge RAM 1500 Mega Cab 4WD truck with this 6-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 36" tires. BDS engineered new lower control arms are longer than stock to rotate the axle for proper alignment and built a relocation mounting bracket to flatten out the angle of the upper control arm to maintain your factory handling characteristics.

Up front the lift kit includes gas-specific Pro-Ride coil springs all four control arms plus relocation bracket forged drop pitman arm and track bar bracket for steering correction bump stops sway bar links and precision tuned FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks longer u-bolts and a matching set of FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Tubular short arms improve strength handling and caster control
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Heavy duty control arm brackets maintain proper suspension geometry
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS FOX performance series IFP gas shocks to improved ride and offroad performance
  • Block Kit: Blocks are made from cast iron for strength, Tapered for correct pinion angle, Steel pin and hole are offset to restore axle position.
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • This truck is available with two different axle sizes 3.5" or 4". Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4066.
  • Rear lift options will not fit dually applications.
  • Although unusual if driveline vibration occurs order transfer case drop kit available in options or t-case index kit.
  • Power Wagon applications require sway bar link kit #122401. The Power Wagon has a 2" taller ride height so net lift gain will be 4".
Improve the ride and style of your Dodge RAM 1500 Mega Cab 4WD truck with this 6-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 36" tires. BDS engineered new lower control arms are longer than stock to rotate the axle for proper alignment and built a relocation mounting bracket to flatten out the angle of the upper control arm to maintain your factory handling characteristics.

Up front the lift kit includes gas-specific Pro-Ride coil springs all four control arms plus relocation bracket forged drop pitman arm and track bar bracket for steering correction bump stops sway bar links and precision tuned FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks longer u-bolts and a matching set of FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Tubular short arms improve strength handling and caster control
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Heavy duty control arm brackets maintain proper suspension geometry
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS FOX performance series IFP gas shocks to improved ride and offroad performance
  • Block Kit: Blocks are made from cast iron for strength, Tapered for correct pinion angle, Steel pin and hole are offset to restore axle position.
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • This truck is available with two different axle sizes 3.5" or 4". Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4066.
  • Rear lift options will not fit dually applications.
  • Although unusual if driveline vibration occurs order transfer case drop kit available in options or t-case index kit.
  • Power Wagon applications require sway bar link kit #122401. The Power Wagon has a 2" taller ride height so net lift gain will be 4".
View AllClose

Related Products

Related Products