BDS Suspension 6" Lift Kit | 4" Rear Block w/ Add-A-Leaf | FOX 2.0 Performance Series Shocks (88-91 Chevy V10/V1500 Suburban| 4WD)

Notes

• The 1/2 ton commonly came with a factory 52" eye to eye rear leaf spring. However some were produced with a 56" rear spring. If ordering rear leaf springs be sure to measure your factory rear spring before ordering.
• If equipped with a factory front sway bar order the front sway bar shackle link kit listed in the accessories section.
• Some vehicle came with factory front dual shocks. If you wish to replace the factory duals you must order the additional two auxiliary shocks in the options.
• #001408 come with OE style rubber bushings installed.
• Exhaust modification may be required to clear front driveshaft.

Features

• Easy 100% Bolt-on installation
• Glideride leaf springs to provide full lift height and increased capacity
• New steering arm maintains proper steering angles for improved handling
• Cast steel blocks and add-a-leaf provide level stance from front to rear
• 4 Inch Block Kit with Add-A-Leaf: Help freshen up old worn-out factory leaf springs, Provides an additional 1 inch of lift, Includes new center pins.
• FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

• The 1/2 ton commonly came with a factory 52" eye to eye rear leaf spring. However some were produced with a 56" rear spring. If ordering rear leaf springs be sure to measure your factory rear spring before ordering.
• If equipped with a factory front sway bar order the front sway bar shackle link kit listed in the accessories section.
• Some vehicle came with factory front dual shocks. If you wish to replace the factory duals you must order the additional two auxiliary shocks in the options.
• #001408 come with OE style rubber bushings installed.
• Exhaust modification may be required to clear front driveshaft.