null
BDS Suspension

BDS Suspension 6" Lift Kit | 4" Rear Block w/Add-A-Leaf | NX2 Nitro Series Shocks (80-87 Chevy/GMC K20/K2500 | 4WD)

(No reviews yet) Write a Review
SKU:
BDS130H
Shipping:
Calculated at Checkout
$1,000.76

Description

Take your Chevy and GMC 3/4 ton truck or SUV to the next level with this 6-inch lift kit from BDS Suspension. Designed to improve stance performance and capability of the K20 and K25 this kit includes everything necessary to set your truck up right with clearance for up to 36" tires.

Up front the lift kit includes Glide-Ride leaf springs 4" steering arm for steering correction brake line brackets and precision tuned NX2 nitrogen charged shocks. In the rear this kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Easy 100% Bolt-on installation
  • Glideride leaf springs to provide full lift height and increased capacity
  • New steering arm maintains proper steering angles for improved handling
  • Cast steel blocks and add-a-leaf provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • 4 Inch Block Kit with Add-A-Leaf: Help freshen up old worn-out factory leaf springs, Provides an additional 1 inch of lift, Includes new center pins.
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • The 3/4 ton commonly came with a factory 56" eye to eye rear leaf spring. However some were produced with a 52" rear spring. If ordering rear leaf springs be sure to measure your factory rear spring before ordering.
  • If equipped with a factory front sway bar order the front sway bar shackle link kit listed in the accessories section.
  • Some vehicle came with factory front dual shocks. If you wish to replace the factory duals you must order the additional two auxiliary shocks in the options.
  • Exhaust modification may be required to clear the front driveshaft.
  • #001608 come with OE style rubber bushings installed.
Take your Chevy and GMC 3/4 ton truck or SUV to the next level with this 6-inch lift kit from BDS Suspension. Designed to improve stance performance and capability of the K20 and K25 this kit includes everything necessary to set your truck up right with clearance for up to 36" tires.

Up front the lift kit includes Glide-Ride leaf springs 4" steering arm for steering correction brake line brackets and precision tuned NX2 nitrogen charged shocks. In the rear this kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Features

  • Easy 100% Bolt-on installation
  • Glideride leaf springs to provide full lift height and increased capacity
  • New steering arm maintains proper steering angles for improved handling
  • Cast steel blocks and add-a-leaf provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • 4 Inch Block Kit with Add-A-Leaf: Help freshen up old worn-out factory leaf springs, Provides an additional 1 inch of lift, Includes new center pins.
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • The 3/4 ton commonly came with a factory 56" eye to eye rear leaf spring. However some were produced with a 52" rear spring. If ordering rear leaf springs be sure to measure your factory rear spring before ordering.
  • If equipped with a factory front sway bar order the front sway bar shackle link kit listed in the accessories section.
  • Some vehicle came with factory front dual shocks. If you wish to replace the factory duals you must order the additional two auxiliary shocks in the options.
  • Exhaust modification may be required to clear the front driveshaft.
  • #001608 come with OE style rubber bushings installed.
View AllClose

Additional Information

View AllClose

Related Products

Related Products