null
BDS Suspension

BDS Suspension 6" Lift Kit | Factory 3 Inch Rear Blocks | NX2 Nitro Series Shocks (11-16 Ford F-250/F-350 Super Duty | 4WD | Gas)

(No reviews yet) Write a Review
SKU:
BDS585H
Shipping:
Calculated at Checkout
$2,300.69

Description

Improve the ride and create more tire clearance on your Ford Super Duty F250 and F350 gas truck and install this 6-inch lift kit from BDS. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs heavy-duty radius arm drop brackets forged drop pitman arm and track bar bracket for steering correction sway bar relocation brake line brackets and custom-tuned nitrogen charged shocks.

In the rear this kit utilizes a replacement GlideRide leaf springs with integrated overload leaf u-bolts brake line brackets and a matching set of NX2 Nitro Series shocks.

Pro-Ride Coil Springs

A pair of full-length gas-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

BDS Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design where the main leaf pack is broken into two stages:

Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.

Features

  • Easy 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty radius arm drop brackets provide correct caster and will maintain your stock driving characteristics.
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Steel lift blocks with built-in bump stop provide level stance from front to rear
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Front exhaust modification may be required to clear front drive shaft (gas only).
  • If equipped with 2-piece driveshaft a driveshaft alignment kit may be required.
  • Although extremely rare front driveline vibration may occur.
  • If equipped with rear sway bar #123009 required.
  • U-bolts will not work on dually.
Improve the ride and create more tire clearance on your Ford Super Duty F250 and F350 gas truck and install this 6-inch lift kit from BDS. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs heavy-duty radius arm drop brackets forged drop pitman arm and track bar bracket for steering correction sway bar relocation brake line brackets and custom-tuned nitrogen charged shocks.

In the rear this kit utilizes a replacement GlideRide leaf springs with integrated overload leaf u-bolts brake line brackets and a matching set of NX2 Nitro Series shocks.

Pro-Ride Coil Springs

A pair of full-length gas-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

BDS Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design where the main leaf pack is broken into two stages:

Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.

Features

  • Easy 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty radius arm drop brackets provide correct caster and will maintain your stock driving characteristics.
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Steel lift blocks with built-in bump stop provide level stance from front to rear
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Front exhaust modification may be required to clear front drive shaft (gas only).
  • If equipped with 2-piece driveshaft a driveshaft alignment kit may be required.
  • Although extremely rare front driveline vibration may occur.
  • If equipped with rear sway bar #123009 required.
  • U-bolts will not work on dually.
View AllClose

Related Products

Related Products