null
BDS Suspension

BDS Suspension 6" Lift Kit | Rear Block Kit w/Add-A-Leaf | NX2 Nitro Series Shocks (00-05 Ford Excursion | 4WD)

(No reviews yet) Write a Review
SKU:
BDS302H
Shipping:
Calculated at Checkout
$1,355.86

Description

Update the style of your Ford Excursion with this 6-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes Glide-Ride leaf springs forged drop pitman arm and track bar bracket for steering correction sway bar links bump stop brackets and precision tuned NX2 nitrogen charged shocks.

In the rear this kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro Performance shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Glideride leaf springs to provide full lift height and increased capacity
  • Track bar relocation bracket maintains proper steering angles for improved handling
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Block Kit with Add-A-Leaf: Add-a-leaf helps freshen up old worn-out factory leaf springs, Blocks are made from cast iron for max strength, Includes new center pins.
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Remove factory block.
  • Models with rear CV driveshaft may experience drive line vibration.
  • Due to OE variances you may need to change the rear block to level the truck.
  • #003202 #003402 #003602 #003609 #003802 & #003809 come with rubber bushings installed.
Update the style of your Ford Excursion with this 6-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes Glide-Ride leaf springs forged drop pitman arm and track bar bracket for steering correction sway bar links bump stop brackets and precision tuned NX2 nitrogen charged shocks.

In the rear this kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro Performance shocks.

Glide-Ride Leaf Springs

Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Easy 100% Bolt-on installation
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Glideride leaf springs to provide full lift height and increased capacity
  • Track bar relocation bracket maintains proper steering angles for improved handling
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Block Kit with Add-A-Leaf: Add-a-leaf helps freshen up old worn-out factory leaf springs, Blocks are made from cast iron for max strength, Includes new center pins.
  • NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

  • Remove factory block.
  • Models with rear CV driveshaft may experience drive line vibration.
  • Due to OE variances you may need to change the rear block to level the truck.
  • #003202 #003402 #003602 #003609 #003802 & #003809 come with rubber bushings installed.
View AllClose

Additional Information

View AllClose

Related Products

Related Products