null
BDS Suspension

BDS Suspension 6" Lift Kit W/Radius Arm | Rear Block w/Add-A-Leaf (80-96 Ford F-150/Bronco | 4WD)

(No reviews yet) Write a Review
SKU:
BDS367H
Shipping:
Calculated at Checkout
$1,521.22

Description

Raise the bar and take your Ford Bronco full size 4WD truck to the next level with a 6-inch suspension lift kit with extended radius arms by BDS. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes Pro-Ride coil springs axle pivot relocation brackets extended radius arms radius arm drop mounts forged pitman arm for steering correction and precision tuned NX2 nitrogen charged shocks.

In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Pro-Ride Coil Springs

A pair of full-length vehicle-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Extended Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. The extended radius arm system will reduce caster change through wheel travel creating a more capable and controlled feeling in the steering wheel both on and off road.

Features

  • Easy Bolt-on installation
  • Pro-Ride dual rate coil springs ride smooth through any terrain
  • Heavy duty steel drop brackets for proper suspension geometry
  • Cast steel blocks provide level stance from front to rear
  • NX2 Nitro shocks with vehicle-specific valving for better control
  • Block Kit with Add-A-Leaf: Add-a-leaf helps freshen up old worn-out factory leaf springs, Blocks are made from cast iron for max strength, Includes new center pins.

Notes

  • Front end alignment required. Alignment cams may be required.
  • #123401 recommended if equipped with a front anti-sway bar. Ford produced 3 different styles of sway bar systemsbetween 1980 and 1996. In extremely rare cases modification may be required.
  • #003208 #003408 and #003608 come with OE style bushings installed.
  • Add two front auxiliary shocks if the vehicle is equipped with factory dual mounts.
  • Extended brake lines required.
Raise the bar and take your Ford Bronco full size 4WD truck to the next level with a 6-inch suspension lift kit with extended radius arms by BDS. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes Pro-Ride coil springs axle pivot relocation brackets extended radius arms radius arm drop mounts forged pitman arm for steering correction and precision tuned NX2 nitrogen charged shocks.

In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.

Pro-Ride Coil Springs

A pair of full-length vehicle-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Extended Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. The extended radius arm system will reduce caster change through wheel travel creating a more capable and controlled feeling in the steering wheel both on and off road.

Features

  • Easy Bolt-on installation
  • Pro-Ride dual rate coil springs ride smooth through any terrain
  • Heavy duty steel drop brackets for proper suspension geometry
  • Cast steel blocks provide level stance from front to rear
  • NX2 Nitro shocks with vehicle-specific valving for better control
  • Block Kit with Add-A-Leaf: Add-a-leaf helps freshen up old worn-out factory leaf springs, Blocks are made from cast iron for max strength, Includes new center pins.

Notes

  • Front end alignment required. Alignment cams may be required.
  • #123401 recommended if equipped with a front anti-sway bar. Ford produced 3 different styles of sway bar systemsbetween 1980 and 1996. In extremely rare cases modification may be required.
  • #003208 #003408 and #003608 come with OE style bushings installed.
  • Add two front auxiliary shocks if the vehicle is equipped with factory dual mounts.
  • Extended brake lines required.
View AllClose

Additional Information

View AllClose

Related Products

Related Products