BDS Suspension 8" Lift Kit | Front Square U-Bolt | NX2 Nitro Series Shocks (99-04 Ford F-250/F-350 Super Duty | 4WD)

Notes

• These truck were manufactured with two different style front u-bolts. You will need to know if your front leaf spring u-bolts are square or are half way between round and square with a gentle radius around the OE cast u-bolt plate before ordering.
• Vehicles produced before 3/1/99 require a different box kit. You must check the production date on the door prior to ordering.
• The Superduty came from the factory with a 2" 3" or 4" rear block. If you wish to truly level your vehicle it may be necessary to change the rear OE block.
• Will not fit dually applications.
• If your vehicle is equipped with a carrier bearing you will want the 123402 drop kit in the options section.
• The front driveshaft will need to be lengthened and/or clearance ground depending on how the vehicle is equipped.

Features

• Easy 100% Bolt-on installation
• BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
• Glideride leaf springs to provide full lift height and increased capacity
• Track bar relocation bracket and pitman arm maintains proper steering angles for improved handling
• Cast steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Front U-Bolt Type: This vehicle was manufactured with either square front U-Bolts or radiused front U-bolts. Typically, 1999-2000 are square and 2001-2004 are radiused, but that is not always the case. The radiused U-bolts aren't square or round, but rather have a gentle radius that matches a cast factory upper U-bolt plate on top of the factory spring. Vehicles manufactured prior to 2-28-99 require yet another different box kit due to a change in the factory track bar. Please make the appropriate selection for your particular vehicle.
• NX2 Nitro Series: Nitrogen-charged, Twin-tube design, 10-stage velocity-sensitive valving, Dual-welded ends for increased strength, 1-3/8-inch high-flow piston, Self-lubricating seals, Silver powder coat finish

Notes

• These truck were manufactured with two different style front u-bolts. You will need to know if your front leaf spring u-bolts are square or are half way between round and square with a gentle radius around the OE cast u-bolt plate before ordering.
• Vehicles produced before 3/1/99 require a different box kit. You must check the production date on the door prior to ordering.
• The Superduty came from the factory with a 2" 3" or 4" rear block. If you wish to truly level your vehicle it may be necessary to change the rear OE block.
• Will not fit dually applications.
• If your vehicle is equipped with a carrier bearing you will want the 123402 drop kit in the options section.
• The front driveshaft will need to be lengthened and/or clearance ground depending on how the vehicle is equipped.