null
BDS Suspension

BDS Suspension 8" Lift Kit | Long Arm | Manual Transmission | Block Kit w/ 3-1/2" Axle | FOX 2.0 Performance Series Shocks (03-07 Dodge Ram 2500/3500 | 4WD | Diesel)

(No reviews yet) Write a Review
SKU:
BDS1742FS
Shipping:
Calculated at Checkout
$2,853.60

Description

Built to outperform BDS Suspension engineered a 8-inch lift kit with long arm conversion for your Dodge RAM 2500 and 3500 diesel powered truck that maximizes performance on and off road. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 38" tires. BDS built the long lower control arms to reduce caster change through wheel travel which creates a more controlled feeling in the steering wheel. This long arm long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system.

Up front the lift kit includes diesel-specific Pro-Ride coil springs all four control arms plus mounting bracket forged drop pitman arm and track bar bracket for steering correction bump stops sway bar links and precision tuned FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks longer u-bolts and a matching set of FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length diesel-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Tubular long arms reduce caster change and create more controlled feeling on and off road
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Heavy duty control arm brackets maintain proper suspension geometry
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS FOX performance series IFP gas shocks to improved ride and offroad performance
  • Block Kit: Blocks are made from cast iron for strength, Tapered for correct pinion angle, Steel pin and hole are offset to restore axle position.
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require UBT4068.
  • Rear lift options will not fit dually applications.
  • If driveline vibration occurs order either transfer case drop. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA
  • Additional front driveline modification may be required.
  • Exhaust modification will be required for dual rear shock kit 122009.
  • 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed
  • If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need to add part # BDS082404 to your kit.
Built to outperform BDS Suspension engineered a 8-inch lift kit with long arm conversion for your Dodge RAM 2500 and 3500 diesel powered truck that maximizes performance on and off road. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 38" tires. BDS built the long lower control arms to reduce caster change through wheel travel which creates a more controlled feeling in the steering wheel. This long arm long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system.

Up front the lift kit includes diesel-specific Pro-Ride coil springs all four control arms plus mounting bracket forged drop pitman arm and track bar bracket for steering correction bump stops sway bar links and precision tuned FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks longer u-bolts and a matching set of FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length diesel-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features

  • Tubular long arms reduce caster change and create more controlled feeling on and off road
  • BDS Suspension offers a huge assortment of truck, SUV and Jeep lift kits and truck accessories
  • Heavy duty control arm brackets maintain proper suspension geometry
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS FOX performance series IFP gas shocks to improved ride and offroad performance
  • Block Kit: Blocks are made from cast iron for strength, Tapered for correct pinion angle, Steel pin and hole are offset to restore axle position.
  • FOX 2.0 Performance Series: 2-inch Impact extruded aluminum body, Internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, Race-developed high-flow piston design, Application-specific valving to maximize performance, Long-lasting clear anodized finish

Notes

  • Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require UBT4068.
  • Rear lift options will not fit dually applications.
  • If driveline vibration occurs order either transfer case drop. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA
  • Additional front driveline modification may be required.
  • Exhaust modification will be required for dual rear shock kit 122009.
  • 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed
  • If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need to add part # BDS082404 to your kit.
View AllClose

Related Products

Related Products