BDS Suspension
BDS Suspension Front Adjustable Track Bar (03-13 Dodge/Ram 2500 | 4WD)
(No reviews yet)
Write a Review
- SKU:
- BDS122315
- Shipping:
- Calculated at Checkout
Description
Replace your stock Dodge Ram 2500 4WD adjustable front track bar with a heavy-duty BDS upgrade, constructed from 1-3/8" solid steel stock reinforced with gusseted ends. Designed for use on 0- to 3-inches of lift and can be used in combination with most aftermarket track bar brackets to be used on taller lift heights.
Adjustments are made at the 1-3/8" x 12 fine-threaded center turnbuckle with pinch-bolt ends to allow easy tuning to properly recenter the front axle for a range of lift heights. Track bar is formed for proper clearance around critical front-end components, designed to easy installation without the need to clear the factory frame and axle mounts. Both ends use high-durometer polyurethane bushings with thick-walled steel sleeves for strength and reliability.
Features
- Heavy-duty 1-3/8" solid stock steel construction
- Center pinch-bolt style turnbuckle adjustment
- Allows front axle to be recentered at a wide range of lift heights
- Specially formed to alleviate stress on mount points
- Ready to install without need to clear factory frame/axle mounts
Replace your stock Dodge Ram 2500 4WD adjustable front track bar with a heavy-duty BDS upgrade, constructed from 1-3/8" solid steel stock reinforced with gusseted ends. Designed for use on 0- to 3-inches of lift and can be used in combination with most aftermarket track bar brackets to be used on taller lift heights.
Adjustments are made at the 1-3/8" x 12 fine-threaded center turnbuckle with pinch-bolt ends to allow easy tuning to properly recenter the front axle for a range of lift heights. Track bar is formed for proper clearance around critical front-end components, designed to easy installation without the need to clear the factory frame and axle mounts. Both ends use high-durometer polyurethane bushings with thick-walled steel sleeves for strength and reliability.
Features
- Heavy-duty 1-3/8" solid stock steel construction
- Center pinch-bolt style turnbuckle adjustment
- Allows front axle to be recentered at a wide range of lift heights
- Specially formed to alleviate stress on mount points
- Ready to install without need to clear factory frame/axle mounts
