null
BDS Suspension

BDS Suspension Front Adjustable Track Bar (17-24 Ford F-250/350 Super Duty | 4WD)

(No reviews yet) Write a Review
SKU:
BDS123203
Shipping:
Calculated at Checkout
$416.06

Description

Replace your stock Ford F-250 or F-350 Super Duty 4WD adjustable front track bar with a heavy-duty BDS upgrade constructed from 1-3/8" solid steel stock reinforced with gusseted ends. Designed for use on 0- to 3-inches of lift and can be used in combination with most aftermarket track bar brackets to be used on taller lift heights.

Adjustments are made at the 1-3/8" x 12 fine-threaded center turnbuckle with pinch-bolt ends to allow easy tuning to properly recenter the front axle for a range of lift heights. Track bar is formed for proper clearance around critical front-end components designed to easy installation without the need to clear the factory frame and axle mounts. Both ends use high-durometer polyurethane bushings with thick-walled steel sleeves for strength and reliability.

Features

  • Heavy-duty 1-3/8" solid stock steel construction
  • Center pinch-bolt style turnbuckle adjustment
  • Allows front axle to be recentered at a wide range of lift heights
  • Specially formed to alleviate stress on mount points
  • Ready to install without need to clear factory frame/axle mounts

Notes

  • Works with 0-4" of lift using the stock track bar bracket
  • 4"-8" with replacement extended track bar bracket
Replace your stock Ford F-250 or F-350 Super Duty 4WD adjustable front track bar with a heavy-duty BDS upgrade constructed from 1-3/8" solid steel stock reinforced with gusseted ends. Designed for use on 0- to 3-inches of lift and can be used in combination with most aftermarket track bar brackets to be used on taller lift heights.

Adjustments are made at the 1-3/8" x 12 fine-threaded center turnbuckle with pinch-bolt ends to allow easy tuning to properly recenter the front axle for a range of lift heights. Track bar is formed for proper clearance around critical front-end components designed to easy installation without the need to clear the factory frame and axle mounts. Both ends use high-durometer polyurethane bushings with thick-walled steel sleeves for strength and reliability.

Features

  • Heavy-duty 1-3/8" solid stock steel construction
  • Center pinch-bolt style turnbuckle adjustment
  • Allows front axle to be recentered at a wide range of lift heights
  • Specially formed to alleviate stress on mount points
  • Ready to install without need to clear factory frame/axle mounts

Notes

  • Works with 0-4" of lift using the stock track bar bracket
  • 4"-8" with replacement extended track bar bracket
View AllClose

Additional Information

View AllClose