null
BDS Suspension

BDS Suspension Traction Bars | Fixed | 3.5" Axle (03-13 Dodge/Ram 2500/03-18 3500 | 4WD)

(No reviews yet) Write a Review
SKU:
BDS122619
Shipping:
Calculated at Checkout
$593.71

Description

Improve traction on your Ram 2500 or Ram 3500 4WD (with 3.5 inch diameter axle tube) with a BDS Fixed length tubular traction bars. Fabricated from 1.25-inch OD x 1/8-inch wall steel tubing with durometer specific polyurethane bushings on each end. BDS traction bars reduce rear pinion angle change commonly referred to as axle wrap during acceleration with these BDS heavy-duty traction bars. Tubular design for good looks as well as serious axle control.

Features

  • Reduce Rear Axle Wrap
  • Tubular Design for Optimal Strength and Appearance
  • Bars are Constructed from 1.25 OD x 1/8" Wall Steel Tubing
  • Application Specific Mounting Brackets Made from 3/16" Steel Plate
  • Durometer Specific Polyurethane Bushings

Notes

  • Body Mount modification may be needed for Crew Cab Long Bed Models.
  • Compatible with 0-8" lift kits however if installed on less than 4" of lift the bars will mount facing downward to allow sufficient clearance to the frame during suspension compression.
Improve traction on your Ram 2500 or Ram 3500 4WD (with 3.5 inch diameter axle tube) with a BDS Fixed length tubular traction bars. Fabricated from 1.25-inch OD x 1/8-inch wall steel tubing with durometer specific polyurethane bushings on each end. BDS traction bars reduce rear pinion angle change commonly referred to as axle wrap during acceleration with these BDS heavy-duty traction bars. Tubular design for good looks as well as serious axle control.

Features

  • Reduce Rear Axle Wrap
  • Tubular Design for Optimal Strength and Appearance
  • Bars are Constructed from 1.25 OD x 1/8" Wall Steel Tubing
  • Application Specific Mounting Brackets Made from 3/16" Steel Plate
  • Durometer Specific Polyurethane Bushings

Notes

  • Body Mount modification may be needed for Crew Cab Long Bed Models.
  • Compatible with 0-8" lift kits however if installed on less than 4" of lift the bars will mount facing downward to allow sufficient clearance to the frame during suspension compression.
View AllClose

Related Products

Related Products