null
BDS Suspension

BDS Suspension Upper Control Arm Kit | Aluminum/ Stamped Steel (16-18 Chevy 1500/GMC 1500)

(No reviews yet) Write a Review
SKU:
BDS121152
Shipping:
Calculated at Checkout
$740.12

Description

Increase wheel travel by upgrading the aluminum or stamped steel OE upper control arms (UCA) on your Chevy Silverado or GMC Sierra 1500 to BDS performance. Specially designed for leveled and lifted applications these arms are built from high-strength 1.5-inch OD x .120-wall steel tubing and feature an indexed ball joint cup to correct the ball joint positioning.

These UCAs can be used with BDS 6.5-inch lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings and premium quality ball joints for smooth quiet operation and superior durability compared to arms featuring uniballs poly bushings or heims.

Features

  • High strength 1.5-inch tubular construction improves strength and durability over stock UCA
  • Indexed ball joint cup allows for increased travel on leveled/lifted applications
  • Factory style rubber bushings for long lasting maintenance-free operation
  • High quality greaseable ball joints and a protective cap to keep out debris
  • Fully assembled and ready to install right out of the box

Notes

  • Designed for vehicles with OE stamped steel or aluminum control arms.
  • Will NOT fit vehicles with OE cast steel arms (use #121151).
  • Control arms are much larger than stock. Tire/wheel selection is critical to allow for proper clearance.
  • Optional weld-on steering stops are for cast steel and stamped steel arms only to eliminate any possible contact between the tire and upper control arm (these steering stops cannot be used on aluminum arms).
  • Wheels (stock/leveled) - 4.5" Backspacing required to run 12.50 wide tires. 5" backspacing will work with 11.50 wide tires (285).
  • Wheels (BDS 4.5/6.5) - works with wheels listed on kit fitment. May require the use of supplied weld-on steering stops for some combinations
  • Will NOT fit Magneride equipped models.
  • The included wheel spacer is to be used in the event the factory spare tire needs to be installed this is for temporary use only.
  • Will work with most leveling kits and 6" lift kits on the market.
Increase wheel travel by upgrading the aluminum or stamped steel OE upper control arms (UCA) on your Chevy Silverado or GMC Sierra 1500 to BDS performance. Specially designed for leveled and lifted applications these arms are built from high-strength 1.5-inch OD x .120-wall steel tubing and feature an indexed ball joint cup to correct the ball joint positioning.

These UCAs can be used with BDS 6.5-inch lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings and premium quality ball joints for smooth quiet operation and superior durability compared to arms featuring uniballs poly bushings or heims.

Features

  • High strength 1.5-inch tubular construction improves strength and durability over stock UCA
  • Indexed ball joint cup allows for increased travel on leveled/lifted applications
  • Factory style rubber bushings for long lasting maintenance-free operation
  • High quality greaseable ball joints and a protective cap to keep out debris
  • Fully assembled and ready to install right out of the box

Notes

  • Designed for vehicles with OE stamped steel or aluminum control arms.
  • Will NOT fit vehicles with OE cast steel arms (use #121151).
  • Control arms are much larger than stock. Tire/wheel selection is critical to allow for proper clearance.
  • Optional weld-on steering stops are for cast steel and stamped steel arms only to eliminate any possible contact between the tire and upper control arm (these steering stops cannot be used on aluminum arms).
  • Wheels (stock/leveled) - 4.5" Backspacing required to run 12.50 wide tires. 5" backspacing will work with 11.50 wide tires (285).
  • Wheels (BDS 4.5/6.5) - works with wheels listed on kit fitment. May require the use of supplied weld-on steering stops for some combinations
  • Will NOT fit Magneride equipped models.
  • The included wheel spacer is to be used in the event the factory spare tire needs to be installed this is for temporary use only.
  • Will work with most leveling kits and 6" lift kits on the market.
View AllClose

Additional Information

View AllClose

Related Products

Related Products