null
BDS Suspension

BDS Suspension Upper Control Arm Kit | Without Sensor (21-23 Ford F-150)

(No reviews yet) Write a Review
SKU:
BDS123261
Shipping:
Calculated at Checkout
$740.12

Description

Increase wheel travel by upgrading the stock OE upper control arms (UCA) on your 2021-2023 Ford F-150 (without sensor) to BDS performance. Specially designed for leveled and lifted applications these arms are built from high-strength 1.5-inch OD x .120-wall steel tubing and feature an indexed ball joint cup to correct the ball joint positioning.

These UCAs can be used with BDS lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings and premium quality ball joints for smooth quiet operation and superior durability compared to arms featuring uniballs poly bushings or heims.

Features

  • High strength 1.5-inch tubular construction improves strength and durability over stock UCA
  • Indexed ball joint cup allows for increased travel on leveled/lifted applications
  • Factory style rubber bushings for long lasting maintenance-free operation
  • High quality greaseable ball joints and a protective cap to keep out debris
  • Fully assembled and ready to install right out of the box

Notes

  • Will work at stock height (0") and 4" of lift but will add additional caster compared to stock alignment specs.
  • Select control arm BDS123262 for trucks with a sensor on the driver side upper control arm. This control arm places the sensor back into the factory location (does not relocate the sensor for any lift that may be installed)
  • Will NOT work with trucks that have CCD (Continuous Controlled Damping)
  • Will NOT work with Tremor models.
  • Will work with Diesel models.
Increase wheel travel by upgrading the stock OE upper control arms (UCA) on your 2021-2023 Ford F-150 (without sensor) to BDS performance. Specially designed for leveled and lifted applications these arms are built from high-strength 1.5-inch OD x .120-wall steel tubing and feature an indexed ball joint cup to correct the ball joint positioning.

These UCAs can be used with BDS lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings and premium quality ball joints for smooth quiet operation and superior durability compared to arms featuring uniballs poly bushings or heims.

Features

  • High strength 1.5-inch tubular construction improves strength and durability over stock UCA
  • Indexed ball joint cup allows for increased travel on leveled/lifted applications
  • Factory style rubber bushings for long lasting maintenance-free operation
  • High quality greaseable ball joints and a protective cap to keep out debris
  • Fully assembled and ready to install right out of the box

Notes

  • Will work at stock height (0") and 4" of lift but will add additional caster compared to stock alignment specs.
  • Select control arm BDS123262 for trucks with a sensor on the driver side upper control arm. This control arm places the sensor back into the factory location (does not relocate the sensor for any lift that may be installed)
  • Will NOT work with trucks that have CCD (Continuous Controlled Damping)
  • Will NOT work with Tremor models.
  • Will work with Diesel models.
View AllClose