null
Cognito

Cognito Front Fender Liner Tie Back Kit (20-24 Chevy Silverado/GMC Sierra 2500/3500)

(No reviews yet) Write a Review
SKU:
COG-110-91193
Shipping:
Calculated at Checkout
$99.95

Description

The Cognito Front Fender Liner Tie Back Kit makes fitting larger tires and offset wheels easier on your Silverado/Sierra 2500/3500 trucks.

For the front fender well, rear lower fender liner brackets, these new brackets bolt on after removing the stock fender liner brackets. The new brackets tie the lower rear portion of the front wheel well fender liner back further to clear larger tires and offset wheels.

Features:
  • Easy Installation
  • No trimming is required to install if leaving off the factory mud guards
  • All necessary installation hardware
  • Powder-coated semi-gloss black
  • 30-minute DIY install time

Notes:
  • On a 3-Inch Leveled Trucks, this kit allows for up to a 35x12.5-Inch Tire on a 9-Inch Wide Wheel with -18mm to +18mm offset, 10-Inch Wide Wheel with 0mm to +10mm offset. 37x12.5-Inch Tire on a 9-Inch Wide Wheel with +18mm offset.
  • If using factory mud guards, they must be trimmed as shown in the instructions.
The Cognito Front Fender Liner Tie Back Kit makes fitting larger tires and offset wheels easier on your Silverado/Sierra 2500/3500 trucks.

For the front fender well, rear lower fender liner brackets, these new brackets bolt on after removing the stock fender liner brackets. The new brackets tie the lower rear portion of the front wheel well fender liner back further to clear larger tires and offset wheels.

Features:
  • Easy Installation
  • No trimming is required to install if leaving off the factory mud guards
  • All necessary installation hardware
  • Powder-coated semi-gloss black
  • 30-minute DIY install time

Notes:
  • On a 3-Inch Leveled Trucks, this kit allows for up to a 35x12.5-Inch Tire on a 9-Inch Wide Wheel with -18mm to +18mm offset, 10-Inch Wide Wheel with 0mm to +10mm offset. 37x12.5-Inch Tire on a 9-Inch Wide Wheel with +18mm offset.
  • If using factory mud guards, they must be trimmed as shown in the instructions.
View AllClose