CrawlTek
CrawlTek Pyro Lower Front Bumper Skid Plate | (07-18 Jeep Wrangler JK)
(No reviews yet)
Write a Review
- SKU:
- CWLJK19001-CTEK
- Shipping:
- Calculated at Checkout
Description
The CrawlTek Pyro Lower Front Bumper Skid Plate for Jeep Wrangler JK is designed to be bolted to the crash bar. It does not need to be attached to the bumper before installation, simply line up the existing holes on your Jeep and attach the included hardware. Compatible with Pyro and Blaze series bumpers, as well as most other aftermarket bumpers that do not require to cut the crash bar.
- The ends of the crash bars will need to be trimmed when installed on 2007-2010 JK Wranglers.
- Not compatible with aftermarket bumpers where modifications to the crash bar is required for install.
- Not compatible with CrawlTek Inferno series bumpers.
The CrawlTek Pyro Lower Front Bumper Skid Plate for Jeep Wrangler JK is designed to be bolted to the crash bar. It does not need to be attached to the bumper before installation, simply line up the existing holes on your Jeep and attach the included hardware. Compatible with Pyro and Blaze series bumpers, as well as most other aftermarket bumpers that do not require to cut the crash bar.
- The ends of the crash bars will need to be trimmed when installed on 2007-2010 JK Wranglers.
- Not compatible with aftermarket bumpers where modifications to the crash bar is required for install.
- Not compatible with CrawlTek Inferno series bumpers.
Related Products
Related Products
CrawlTek Pyro Full-Width Front Bumper | (07-18 Jeep Wrangler JK)
CrawlTek
$829.00
The Pyro series Front Winch Bumper is a high quality solution designed to increase approach angle, provide recessed winch fitment, and retain factory fog lights - all while being entirely bolt-on...
CrawlTek Pyro Stubby Front Winch Bumper | (07-18 Jeep Wrangler JK)
CrawlTek
$729.00
The Pyro series Front Winch Bumper is a high quality solution designed to increase approach angle, provide recessed winch fitment, and retain factory fog lights - all while being entirely bolt-on...
CrawlTek Pyro Mid-Width Front Winch Bumper | (07-18 Jeep Wrangler JK)
CrawlTek
$779.00
The Pyro series Front Winch Bumper is a high quality solution designed to increase approach angle, provide recessed winch fitment, and retain factory fog lights - all while being entirely bolt-on...
CrawlTek Pyro Full-Width Rear Bumper | (07-18 Jeep Wrangler JK)
CrawlTek
$729.00
Made from 3/16" HRPO Steel, this rear bumper is designed for maximum clearance for getting off obstacles.Made from 3/16" HRPO Steel, this rear bumper is designed for maximum clearance for getting off...
CrawlTek Pyro Mid-Width Rear Bumper | (07-18 Jeep Wrangler JK)
CrawlTek
$669.00
Made from 3/16" HRPO Steel, this rear bumper is designed for maximum clearance for getting off obstacles.Made from 3/16" HRPO Steel, this rear bumper is designed for maximum clearance for getting off...
CrawlTek Inferno Rear Bumper | (07-18 Jeep Wrangler JK)
CrawlTek
$599.00
Made from 3/16" HRPO steel this bumper is made here in the USA. Designed for maximum departure this bumper is the tightest fitting bumper on the market.This product requires removal off the rear...
CrawlTek Inferno Front Winch Bumper (07-18 Jeep Wrangler JK/18-24 Wrangler JL)
CrawlTek
$579.00
If you are looking for a front bumper that provides greatly improved approach angle while also providing a sleek and recessed winch mount, look no further than the CrawlTek Inferno Front Winch Bumper...
CrawlTek Inferno Front Bumper with Stinger (07-18 Jeep Wrangler JK/18-24 Wrangler JL)
CrawlTek
$699.00
If you are looking for a front bumper that provides greatly improved approach angle while also providing a sleek and recessed winch mount, look no further than the CrawlTek Inferno Front Winch Bumper...
CrawlTek Front Inner Fenders | (07-18 Jeep Wrangler JK)
CrawlTek
$289.00
Made from 5052 16 GA aluminum our Jeep Wrangler JK Inner Fender kit compliments any aftermarket fender. Features a .75" hole for mounting a LED Marker light (Not Included) or to route your wires to...