null
Decked

Decked CargoGlide | 1,000 LB capacity | 52" L x 41" W | 70% Extension (22-24 Ford Maverick)

(No reviews yet) Write a Review
SKU:
CG1000-5241-FXWQ
Shipping:
Calculated at Checkout
$1,399.99

Description

LOAD IT UP AND GET TO WORK
Never crawl into your truck bed or van again
Multi-position cargo stops
Industrial-grade American steel and aluminum
Tray uses resin coated marine-grade plywood

ROLL IT OUT AND GET ROLLIN'
Ballsy ball bearings for buttery-smooth action
Easily operated with one hand (& a donut)
Auto-stop handle prevents runaway cargo moments
Installation so quick and simple, monkeys can do it

PLAYS NICE WITH DRAWER SYSTEMS
Bolts directly to Drawer Systems for the ultimate setup
No-drill mounting for new Drawer Systems
Drawers take 1,000 lb payload and 70% extension only

Features:
  • HEAVY LOADS? SLOPES? NO PROBLEM: Slide thrust bearings keep the loaded tray from binding when parked on angled slopes and rolling smoothly regardless of torque or load.
  • SECURE CARGO RETENTION: Side channels offer infinite adjustable cargo tie-down locations. Comes standard with 4 galvanized Tie-Down Loops.
  • EASY TO USE: Never crawl into your bed again. Leave the pillow talk at home. Rugged construction and an elegant operating design make work life easy.
  • EASY INSTALLATION: CargoGlide comes pre-assembled. Simply drill according to instructions, install hardware and bolt it down. Boom. 30 minutes and done.
  • Powder coated USA steel frame
  • Industrial 0.75" Marine Plywood deck, Coated with a thermoplastic top sheet
  • Aluminum sidewalls
  • 14 double roller bearings mid frame 3203zz
  • 12 side thrust bearings mid frame 6201
  • 2 Cam follower bearings bottom frame (tailgate end) 1.25" CYR
Notes:
  • Weight: 123 lb.
  • Payload: 1000 lb.
  • A (Width): 41.75 in.
  • B (Length): 52 in.
  • C (Height): 7 in.
  • Tray Width: 41 in.
  • Tray Length: 51 in.
  • Tray Height: 4 in.
  • Extension: 70%.
  • TAILGATE CLEARANCE: Some tailgates don't lay flat when open, which will cause binding when extending the CargoGlide tray. The highest point on your tailgate when open must be less than 3/4" above your truck bed floor to ensure compatibility. Before drilling into your bed, test the fit according to our install instructions.
  • COMPATIBLE WITH: Spray-In Bed Liners
  • NOT COMPATIBLE WITH: Bedrug / Drop-in Plastic Bed Liner, Stepside / Flareside, Service Body, 5th Wheel/Gooseneck, Carbon Pro Bed, DECKED Drawer System, DECKED Tool Box, Rambox, Composite Beds
LOAD IT UP AND GET TO WORK
Never crawl into your truck bed or van again
Multi-position cargo stops
Industrial-grade American steel and aluminum
Tray uses resin coated marine-grade plywood

ROLL IT OUT AND GET ROLLIN'
Ballsy ball bearings for buttery-smooth action
Easily operated with one hand (& a donut)
Auto-stop handle prevents runaway cargo moments
Installation so quick and simple, monkeys can do it

PLAYS NICE WITH DRAWER SYSTEMS
Bolts directly to Drawer Systems for the ultimate setup
No-drill mounting for new Drawer Systems
Drawers take 1,000 lb payload and 70% extension only

Features:
  • HEAVY LOADS? SLOPES? NO PROBLEM: Slide thrust bearings keep the loaded tray from binding when parked on angled slopes and rolling smoothly regardless of torque or load.
  • SECURE CARGO RETENTION: Side channels offer infinite adjustable cargo tie-down locations. Comes standard with 4 galvanized Tie-Down Loops.
  • EASY TO USE: Never crawl into your bed again. Leave the pillow talk at home. Rugged construction and an elegant operating design make work life easy.
  • EASY INSTALLATION: CargoGlide comes pre-assembled. Simply drill according to instructions, install hardware and bolt it down. Boom. 30 minutes and done.
  • Powder coated USA steel frame
  • Industrial 0.75" Marine Plywood deck, Coated with a thermoplastic top sheet
  • Aluminum sidewalls
  • 14 double roller bearings mid frame 3203zz
  • 12 side thrust bearings mid frame 6201
  • 2 Cam follower bearings bottom frame (tailgate end) 1.25" CYR
Notes:
  • Weight: 123 lb.
  • Payload: 1000 lb.
  • A (Width): 41.75 in.
  • B (Length): 52 in.
  • C (Height): 7 in.
  • Tray Width: 41 in.
  • Tray Length: 51 in.
  • Tray Height: 4 in.
  • Extension: 70%.
  • TAILGATE CLEARANCE: Some tailgates don't lay flat when open, which will cause binding when extending the CargoGlide tray. The highest point on your tailgate when open must be less than 3/4" above your truck bed floor to ensure compatibility. Before drilling into your bed, test the fit according to our install instructions.
  • COMPATIBLE WITH: Spray-In Bed Liners
  • NOT COMPATIBLE WITH: Bedrug / Drop-in Plastic Bed Liner, Stepside / Flareside, Service Body, 5th Wheel/Gooseneck, Carbon Pro Bed, DECKED Drawer System, DECKED Tool Box, Rambox, Composite Beds
View AllClose

Related Products

Related Products