null
Decked

Decked CargoGlide | 1,000 LB capacity | 56" L x 41" W | 100% Extension (19-24 Ford Ranger/00-10 Dodge Dakota/06-24 Nissan Frontier)

(No reviews yet) Write a Review
SKU:
CG1000XL-5641-FXWQ
Shipping:
Calculated at Checkout
$2,199.99

Description

LOAD IT UP AND GET TO WORK
Never crawl into your truck bed or van again
Multi-position cargo stops
Industrial-grade American steel and aluminum
Tray uses resin coated marine-grade plywood

ROLL IT OUT AND GET ROLLIN'
Ballsy ball bearings for buttery-smooth action
Easily operated with one hand (& a donut)
Auto-stop handle prevents runaway cargo moments
Installation so quick and simple, monkeys can do it

PLAYS NICE WITH DRAWER SYSTEMS
Bolts directly to Drawer Systems for the ultimate setup
No-drill mounting for new Drawer Systems
Drawers take 1,000 lb payload and 70% extension only
Features:
  • ONE-HANDED OPERATION: Keep talking on the phone while you slide up to 1000 lb of work out to you with ease. Multiple cargo stops let you control the extension.
  • HEAVY LOADS? SLOPES? NO PROBLEM: Slide thrust bearings keep the loaded tray from binding when parked on angled slopes and rolling smoothly regardless of torque or load.
  • SECURE CARGO RETENTION: Side channels offer infinite adjustable cargo tie-down locations. Comes standard with 4 galvanized Tie-Down Loops.
  • EASY TO USE: Never crawl into your bed again. Leave the pillow talk at home. Rugged construction and an elegant operating design make work life easy.
  • EASY INSTALLATION: CargoGlide comes pre-assembled. Simply drill according to instructions, install hardware and bolt it down. Boom. 30 minutes and done.
  • Powder coated USA steel frame
  • Industrial 0.75" Marine Plywood deck, Coated with a thermoplastic top sheet
  • Aluminum sidewalls
  • 14 double roller bearings mid frame 3203zz
  • 12 side thrust bearings mid frame 6201
  • 2 Cam follower bearings bottom frame (tailgate end) 1.25" CYR
Notes:
  • Weight: 255 lb.
  • A (Width): 41.75 in.
  • B (Length): 56 in.
  • C (Height): 13.5 in.
  • Tray Width: 41 in.
  • Tray Length: 55 in.
  • Tray Height: 5.5 in.
  • Extension: 100%.
  • TAILGATE CLEARANCE: Some tailgates don't lay flat when open, which will cause binding when extending the CargoGlide tray. The highest point on your tailgate when open must be less than 3/4" above your truck bed floor to ensure compatibility. Before drilling into your bed, test the fit according to our install instructions.
  • CARGOGLIDE HIGH SIDES: CargoGlide High Sides come included free of charge with any 100% extension CargoGlide.
  • COMPATIBLE WITH: Spray-In Bed Liners
  • NOT COMPATIBLE WITH: Stepside / Flareside, Bedrug / Drop-in Plastic Bed Liner, 5th Wheel/Gooseneck, Service Body, Carbon Pro Bed, DECKED Tool Box, DECKED Drawer System, Rambox, Composite Beds
  • Ford Transit Connect: MUST BE a Cargo Van, with a 104" wheel base in order to guarantee fitment.
  • Ram Promaster: MUST BE a Cargo Van with a 136" or 159" wheel base in order to guarantee fitment.
  • 1996-99 Toyota Tacoma: Will also fit but please verify that your bed length matches the CargoGlide's intended bed length.
LOAD IT UP AND GET TO WORK
Never crawl into your truck bed or van again
Multi-position cargo stops
Industrial-grade American steel and aluminum
Tray uses resin coated marine-grade plywood

ROLL IT OUT AND GET ROLLIN'
Ballsy ball bearings for buttery-smooth action
Easily operated with one hand (& a donut)
Auto-stop handle prevents runaway cargo moments
Installation so quick and simple, monkeys can do it

PLAYS NICE WITH DRAWER SYSTEMS
Bolts directly to Drawer Systems for the ultimate setup
No-drill mounting for new Drawer Systems
Drawers take 1,000 lb payload and 70% extension only
Features:
  • ONE-HANDED OPERATION: Keep talking on the phone while you slide up to 1000 lb of work out to you with ease. Multiple cargo stops let you control the extension.
  • HEAVY LOADS? SLOPES? NO PROBLEM: Slide thrust bearings keep the loaded tray from binding when parked on angled slopes and rolling smoothly regardless of torque or load.
  • SECURE CARGO RETENTION: Side channels offer infinite adjustable cargo tie-down locations. Comes standard with 4 galvanized Tie-Down Loops.
  • EASY TO USE: Never crawl into your bed again. Leave the pillow talk at home. Rugged construction and an elegant operating design make work life easy.
  • EASY INSTALLATION: CargoGlide comes pre-assembled. Simply drill according to instructions, install hardware and bolt it down. Boom. 30 minutes and done.
  • Powder coated USA steel frame
  • Industrial 0.75" Marine Plywood deck, Coated with a thermoplastic top sheet
  • Aluminum sidewalls
  • 14 double roller bearings mid frame 3203zz
  • 12 side thrust bearings mid frame 6201
  • 2 Cam follower bearings bottom frame (tailgate end) 1.25" CYR
Notes:
  • Weight: 255 lb.
  • A (Width): 41.75 in.
  • B (Length): 56 in.
  • C (Height): 13.5 in.
  • Tray Width: 41 in.
  • Tray Length: 55 in.
  • Tray Height: 5.5 in.
  • Extension: 100%.
  • TAILGATE CLEARANCE: Some tailgates don't lay flat when open, which will cause binding when extending the CargoGlide tray. The highest point on your tailgate when open must be less than 3/4" above your truck bed floor to ensure compatibility. Before drilling into your bed, test the fit according to our install instructions.
  • CARGOGLIDE HIGH SIDES: CargoGlide High Sides come included free of charge with any 100% extension CargoGlide.
  • COMPATIBLE WITH: Spray-In Bed Liners
  • NOT COMPATIBLE WITH: Stepside / Flareside, Bedrug / Drop-in Plastic Bed Liner, 5th Wheel/Gooseneck, Service Body, Carbon Pro Bed, DECKED Tool Box, DECKED Drawer System, Rambox, Composite Beds
  • Ford Transit Connect: MUST BE a Cargo Van, with a 104" wheel base in order to guarantee fitment.
  • Ram Promaster: MUST BE a Cargo Van with a 136" or 159" wheel base in order to guarantee fitment.
  • 1996-99 Toyota Tacoma: Will also fit but please verify that your bed length matches the CargoGlide's intended bed length.
View AllClose

Related Products

Related Products