Decked
Decked Full-Size Pickup Truck Tool Box Deep Tub | Tundra Rail System (22-23 Toyota Tundra)
- SKU:
- TBFDT22-FXWQ
- Shipping:
- Calculated at Checkout
Description
ONE TOOL BOX TO RULE THEM ALL
The last toolbox you'll ever buy
Totally, and we mean, completely waterproof
Molded polymers that will never rust or corrode
110% dent and ding proof
100% WEATHER (& IDIOT)- PROOF
Engineered, keeps moisture out under harshest conditions
Seamless molded construction; basically hurricane-proof
Lid gasket seals tightly to the tub
Guaranteed tool protection
INSANE SECURITY HATED BY THIEVES
Locks securely with a single driver-side keyed lock
Steel reinforced lid makes forced entry nearly impossible
Attached to the truck bed from inside the Tool Box
Won't even bend under pressure of a crowbar
Features:
- WILL NEVER RUST: HDPE and ASA resins don't corrode. At all. Take that, Rust Belt!
- PAYLOAD: Built to take a beating, the Tool Box has a 500 lb dynamic payload rating.
- MODERN LOOK: Your truck called, it wants a box that looks as badass as your truck.
- DENT AND DING PROOF: Beat on this thing all you want and it'll still be looking fresh.
- WATERPROOF DESIGN: Because Mother Nature can be a real mother. Seals up tighter than Tupperware.
- 100% Waterproof
- 100% Dent Proof: Looks new forever. Hammer on it. It won't dent. Ever. No paint to flake off.
- 800 Beers: That's how many you could pour out into it. But don't abuse alcohol like that.
- TOOL BOX INSTALLATION: 5 minutes (comes preassembled) instructions sets
Notes:
- Volume: 280 L.
- Weight: 103 lb.
- A (Width): 22 in.
- B (Length): 76 in.
- C (Height): 20.5 in.
- Internal Dimensions Width: 17.9 in.
- Internal Dimensions Length: 60 in.
- Internal Dimensions Depth: 17.4 in.
- Lid: Steel Reinforced Injection Molded High-Impact Polymer Resin
- Base: Injection Molded, Impact Treated High Density Polyethylene
- Hardware: Anti-Corrosion Treated Steel and Aluminum
- Ladder: 6000 Series Aluminum
- TOW PACKAGE COMPATIBILITY: Ensure adequate clearance for Gooseneck/Fifth Wheel. Consider trailer swing while turning to avoid Tool Box collision. DECKED Tool Box sits 6" above bed rails and takes up 24" of bed depth.
- DUAL REAR WHEELS: If you have a dually fender, the Tool Box is compatible, but the access Ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly.
- FIT: If you have a truck older than 2001, the DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" (this should be the measurement from the left inside bed rail to the right inside bed rail).
- COMPATIBLE WITH: Spray-In Bed Liners
- NOT COMPATIBLE WITH: Stepside / Flareside, Bedrug / Drop-in Plastic Bed Liner, Service Body, Carbon Pro Bed
- Tool Box Tray
- Snack Tray
ONE TOOL BOX TO RULE THEM ALL
The last toolbox you'll ever buy
Totally, and we mean, completely waterproof
Molded polymers that will never rust or corrode
110% dent and ding proof
100% WEATHER (& IDIOT)- PROOF
Engineered, keeps moisture out under harshest conditions
Seamless molded construction; basically hurricane-proof
Lid gasket seals tightly to the tub
Guaranteed tool protection
INSANE SECURITY HATED BY THIEVES
Locks securely with a single driver-side keyed lock
Steel reinforced lid makes forced entry nearly impossible
Attached to the truck bed from inside the Tool Box
Won't even bend under pressure of a crowbar
Features:
- WILL NEVER RUST: HDPE and ASA resins don't corrode. At all. Take that, Rust Belt!
- PAYLOAD: Built to take a beating, the Tool Box has a 500 lb dynamic payload rating.
- MODERN LOOK: Your truck called, it wants a box that looks as badass as your truck.
- DENT AND DING PROOF: Beat on this thing all you want and it'll still be looking fresh.
- WATERPROOF DESIGN: Because Mother Nature can be a real mother. Seals up tighter than Tupperware.
- 100% Waterproof
- 100% Dent Proof: Looks new forever. Hammer on it. It won't dent. Ever. No paint to flake off.
- 800 Beers: That's how many you could pour out into it. But don't abuse alcohol like that.
- TOOL BOX INSTALLATION: 5 minutes (comes preassembled) instructions sets
Notes:
- Volume: 280 L.
- Weight: 103 lb.
- A (Width): 22 in.
- B (Length): 76 in.
- C (Height): 20.5 in.
- Internal Dimensions Width: 17.9 in.
- Internal Dimensions Length: 60 in.
- Internal Dimensions Depth: 17.4 in.
- Lid: Steel Reinforced Injection Molded High-Impact Polymer Resin
- Base: Injection Molded, Impact Treated High Density Polyethylene
- Hardware: Anti-Corrosion Treated Steel and Aluminum
- Ladder: 6000 Series Aluminum
- TOW PACKAGE COMPATIBILITY: Ensure adequate clearance for Gooseneck/Fifth Wheel. Consider trailer swing while turning to avoid Tool Box collision. DECKED Tool Box sits 6" above bed rails and takes up 24" of bed depth.
- DUAL REAR WHEELS: If you have a dually fender, the Tool Box is compatible, but the access Ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly.
- FIT: If you have a truck older than 2001, the DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" (this should be the measurement from the left inside bed rail to the right inside bed rail).
- COMPATIBLE WITH: Spray-In Bed Liners
- NOT COMPATIBLE WITH: Stepside / Flareside, Bedrug / Drop-in Plastic Bed Liner, Service Body, Carbon Pro Bed