null
DV8 Offroad

DV8 Off-Road Rear Bumper | FS-15 Series (21-23 Ford Bronco)

(No reviews yet) Write a Review
SKU:
DV8-RBBR-02
Shipping:
Calculated at Checkout
$999.99

Description

The FS-15 Series Bronco Rear Bumper was designed to maximize ground clearance when taking your Bronco off-road. It provides superior rear-end protection while closely following the factory body style and contours. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37-inch spare tire mounted on the OEM carrier will fit above the bumper. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension.

Two 3-inch flush mount pod lights can be installed towards either side of the bumper to provide supplemental trail lighting. Alternatively, they can be wired together and work in tandem with your reverse lights. Two reinforced clevis mounts that take 3/4-inch D-ring shackles provide recovery options during your off-road adventures.

Our high clearance Bronco bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.
Features:
  • Higher Than Factory Ground Clearance
  • 3.5mm Steel Plates with 5mm Steel Supports
  • Micro Texture Black Powder Coat
  • Accepts Two, 3" Flush Mount LED Pod Lights
  • Dual Clevis Mounts for 3/4" D-Ring Shackles
  • Retains Factory Backup Sensors
  • Accommodates up to 37" Spare Tire
  • Compatible with Factory Tow Hitch
Notes:
  • Need to remove rear mud flaps on select models
  • Included license plate bracket does not fit the Raptor. License Plate Bracket LPBR-03 is required
The FS-15 Series Bronco Rear Bumper was designed to maximize ground clearance when taking your Bronco off-road. It provides superior rear-end protection while closely following the factory body style and contours. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37-inch spare tire mounted on the OEM carrier will fit above the bumper. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension.

Two 3-inch flush mount pod lights can be installed towards either side of the bumper to provide supplemental trail lighting. Alternatively, they can be wired together and work in tandem with your reverse lights. Two reinforced clevis mounts that take 3/4-inch D-ring shackles provide recovery options during your off-road adventures.

Our high clearance Bronco bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.
Features:
  • Higher Than Factory Ground Clearance
  • 3.5mm Steel Plates with 5mm Steel Supports
  • Micro Texture Black Powder Coat
  • Accepts Two, 3" Flush Mount LED Pod Lights
  • Dual Clevis Mounts for 3/4" D-Ring Shackles
  • Retains Factory Backup Sensors
  • Accommodates up to 37" Spare Tire
  • Compatible with Factory Tow Hitch
Notes:
  • Need to remove rear mud flaps on select models
  • Included license plate bracket does not fit the Raptor. License Plate Bracket LPBR-03 is required
View AllClose