null
EBC

EBC 6000 Series Greenstuff Rear Brake Pads | 05-07 Ford F-250/F-350 (SRW)

(No reviews yet) Write a Review
SKU:
EBC-DP61778
Shipping:
Calculated at Checkout
$92.79

Description

Upgrade your stopping power with a simple pad change using EBC GreenStuff 6000 series Kevlar brake pads. The EBC 6000 series boasts GG rated friction for better stopping with fully shimmed edge chamfered and slotted construction for silent running. Being an upgrade pad these may have a shorter life than other hard aftermarket pads. EBC's unique Brake-in surface coating on the pad surface conditions rotors and guarantees perfect brakes from first installation.

Features:
  • Sport replacement pad for Truck and SUV
  • Improves stopping power
  • Lower dust
Notes:
  • DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT
  • The Thermic Black coating does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle. The Thermic Black coating is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty.

Rear Brake Pad Set
Upgrade your stopping power with a simple pad change using EBC GreenStuff 6000 series Kevlar brake pads. The EBC 6000 series boasts GG rated friction for better stopping with fully shimmed edge chamfered and slotted construction for silent running. Being an upgrade pad these may have a shorter life than other hard aftermarket pads. EBC's unique Brake-in surface coating on the pad surface conditions rotors and guarantees perfect brakes from first installation.

Features:
  • Sport replacement pad for Truck and SUV
  • Improves stopping power
  • Lower dust
Notes:
  • DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT
  • The Thermic Black coating does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle. The Thermic Black coating is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty.

View AllClose

Additional Information

View AllClose

Related Products

Related Products