null
Fabtech

Fabtech 3" Crawler System W/ Dirt Logic 2.25 Shocks (18-23 Jeep Wrangler JL | 4WD | 4 Door)

(No reviews yet) Write a Review
SKU:
K4131DL-FAB
Shipping:
Calculated at Checkout
$5,330.61

Description

Fabtech's JL Crawlerlong arm systems are built to meet the most experienced driver?s expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further.

A key part of the mounting of the Crawlers 5 TonLink Armsto the frame is the geometry and ground clearance. The location of the frame side of the link Armsis critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link Armsthat provide a superior driving long arm system compared to all others on the market.

Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links Armsat the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle.

The Fabtech lower Link Armsare massive and built of 2" OD .31" thick wall tubing that is guaranteed not to bend. Upper and lower Link Armsincludes the Fabtech's legendary 5 Ton Joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.

Features


  • Front & Rear Lower 5 TonLink Arms/li>
  • Front Link Arm Crossmember & Skid Plate
  • Rear Lower Link Arm Mounts
  • Front & Rear Corner Specific Dual Rate Coil Springs
  • Front & Rear Bump Stop Extensions
  • Front & Rear Sway Bar Links
  • Front & Rear Brake Line Drops
  • Front & Rear Track Bar Bracket
  • Heavy Duty Flipped Draglink
  • Front Shock Mount Brackets
  • Front & Rear Dirt Logic 2.25 Shocks

Notes

 

  • Installation requires welding.
  • Fits 6 CYL. gas models only.
  • Fits 4-Door models only.
  • Exhaust modification required on all 201" Jeep JL wranglers or order AFE P/N 48-48024 Loop Delete Pipe.
  • Requires driveshafts. 4-Door models Front (FTS94057) Rear (FTS94065).
Fabtech's JL Crawlerlong arm systems are built to meet the most experienced driver?s expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further.

A key part of the mounting of the Crawlers 5 TonLink Armsto the frame is the geometry and ground clearance. The location of the frame side of the link Armsis critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link Armsthat provide a superior driving long arm system compared to all others on the market.

Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links Armsat the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle.

The Fabtech lower Link Armsare massive and built of 2" OD .31" thick wall tubing that is guaranteed not to bend. Upper and lower Link Armsincludes the Fabtech's legendary 5 Ton Joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.

Features


  • Front & Rear Lower 5 TonLink Arms/li>
  • Front Link Arm Crossmember & Skid Plate
  • Rear Lower Link Arm Mounts
  • Front & Rear Corner Specific Dual Rate Coil Springs
  • Front & Rear Bump Stop Extensions
  • Front & Rear Sway Bar Links
  • Front & Rear Brake Line Drops
  • Front & Rear Track Bar Bracket
  • Heavy Duty Flipped Draglink
  • Front Shock Mount Brackets
  • Front & Rear Dirt Logic 2.25 Shocks

Notes

 

  • Installation requires welding.
  • Fits 6 CYL. gas models only.
  • Fits 4-Door models only.
  • Exhaust modification required on all 201" Jeep JL wranglers or order AFE P/N 48-48024 Loop Delete Pipe.
  • Requires driveshafts. 4-Door models Front (FTS94057) Rear (FTS94065).
View AllClose

Additional Information

View AllClose